Ever looked to the skies and wondered what it would be like to roam across the stars, look here to create your own 3d-printed drone!!!
Project in progress by Team DIY Drone
I took a normal lawn tractor and added some motors, actuators, and electronics to make it remote-controlled.
Project in progress by Michael Rechtin
Interconnect solar street-lamps by adding monitoring and communication devices into them.
Project in progress by marcosjom
If you can't fix it in software you'll have to fix it in hardware in this case. Hence the NMEAtor.
Project in progress by Waps 61
ATM is an Arduino based split flap display which aims to give users a satisfying tarot card reading experience.
Project in progress by i_mozy
Open-source design for a "Génies en Herbe" / "Reach for the Top" quiz machine (can't afford the machines that are for sale on the Internet).
Project in progress by vinfort
The objective of this project is to control the ROBONOVA-1 and make a few steps whith it.
Project in progress by micho94
This launch pad helps your rocket go high and far!
Project in progress by Cole Purtzer
Like a real pyranometer, realize a measurement of sun power.
Project in progress by KFMAKR
Clouds meter <> establish the height of clouds through an IR measurement temperature of saturation.
Forward and Inverse Kinematics Library for Delta robot.
Project in progress by tinkersprojects
Creating a GPS-controlled, camera-equipped RC boat with an Arduino Mega and 433 MHz remote.
Project in progress by maboshi
Laser Cut Arduino Midi Drum Pads and Audio Waveform Visualizer
Project in progress by Laser Drums
Play tic-tac-toe against a robotic arm controlled by an Arduino Mega 2560.
Project in progress by bobn2tech
A high power and highly programmable smart battery charger, LED driver and programmable DC source all in one.
Project in progress by PowerShield0621
This project is meant to protect you from any thief who may try to hack the password to your system.
Project in progress by muhammed amar slik
Control temperature for up to 8 separate processes! Cooling/heating control with humidity sensing. Based on Arduino and DS18B20/DHT22.
Project in progress by Leo
The oldie but goodie returns in the form of the infrared joystick set from an old Atari game system. These will control multiple things.
Project in progress by Pigeon-Kicker
MEGA BREAD series #4, the 4 by 4 input keypad.
Working Star Trek tricorder, including a temperature sensor, and multiple other show-like scanning features.
Project in progress by The Trekduinos
A Service Oriented Architecture to keep your robots source code organized and scalable as they grow, iteration after iteration.
Project in progress by Nahuel Taibo
This is a project to control our irritation system, in this case a drip system, using a Raspberry Pi 2 and Cayenne.
Project in progress by Jhonnatan Garcia
A capacative touch sensor allows text message feedback when an intruder enters the room as well as turning on the lights and fan.
Project in progress by Randa El Ali and Jesse Laprad
Commercial Automation for a lumber mill including relay controls and sensor networks to run daily operations.
Project in progress by amosp33
Or connect with your social account:
New here? Create an account