Add more fun to bottle rockets!
Project in progress by mbagrianski
This is a project of Radio Receiver LW/MW/SW Stereo FM with RDS, using Arduino Nano, Si473x Radio IC and 1.8in TFT color display ST7735.
Project in progress by CesarSound
Simple device to control and initialize DALI lamps.
Project in progress by NabiyevTR
The task was to control a lighting system with an Arduino via DMX.
Project in progress by max_loser
Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG).
Project in progress by Jeff Magee
A firefighter Arduino autonomous robot which is capable of detecting, approaching and extinguishing fire.
Project in progress by Alberto Ben
A simple 8x32 LED matrix alarm clock.
Project in progress by vikonix
For use in DIY homebrew radio equipment such superheterodyne receivers, SDR, HAM QRP transceivers or RF generator.
A low cost air quality monitoring device created with an aim to detect pollution hotspots caused due to traffic jams or factory emissions.
Project in progress by Tejas Shah and Kavyashree P
Meet the little black rover that can do many things in your house without bumping into a single thing!
Project in progress by Cole Purtzer
This is a musical Tesla Coil driven by an Arduino and Slayer-Exciter. Using an Arduino, you can play music with pure electricity!
Project in progress by Brandon Michelsen
This project will show you how to make an automated watering system and water level indicator.
Project in progress by Saikan45
Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.
Project in progress by Mark Daniel Belarmino
This is my next project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.
Project in progress by Andriy Baranov
Aquarium monitor with automation, Web GUI & IoT. Daisychain units can control multiple tanks all from the one master unit.
Project in progress by Craig Hissett
Piezos used as contact microphones to activate LEDs and shine lights through Samba drums.
Project in progress by Tisham Dhar
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
Project in progress by philippedc
Minimalist cars race with a strip of smart LEDs and two switches.This project has evolved and now has its own website: www.openledrace.com
Project in progress by Gerardo Barbarov Rostan
An environmental monitoring system using a Nano, with GPS, BME680, VEML6070, MiCS-5524, BH1750, a 128x64 OLED, and NeoPixels.
Project in progress by Pyre Mage
An attempt to achieve: 1. Shifter LEDs with RPM display 2. Manual gearbox sensing and display 3. CAN bus values forwarding to RaceChrono.
Project in progress by Ankel2000
Replaced a bad keypad on the outside of my garage door.
Project in progress by ddsitzmann
Here is my first step to crete the clock based on *x8 LED matrixes
Project in progress by mdraber
This Arduino-based machine will always prepare perfect Argentine mate (traditional infused drink).
Project in progress by Roni Bandini
This study is an example how to build a 3-phases 230V/380V from a 12-24V DC with an Arduino Uno
Or connect with your social account:
New here? Create an account