This fully functioning Geiger counter was designed after the PKE Meter from the 1980s Ghostbusters movie.

A ritual instrument of dying that can be played with when I no longer have any strength to use any other instrument. Until the last breath.

Pulse induction metal detector, built on the Arduino Nano.

How to use the ArduiBox Open DIN rail enclosure set for Arduino Nano, UNO and Yun Rev 2.

WS2812 LEDs in drums!

An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.

LED Cube powered with Arduino Nano and controlled by an HC-05 receiving from a Bluetooth App + Custom Animation Creator and Snake Game

A short and simpel project for visiualize Audio signals with LEDs.

Another indoor greenhouse powered by Nano. 100% controlled environment with some extra perks that make life easier.

This Arduino project automatically switches the watersource solenoid depending on the available stored rainwater.

This research was conducted focusing on the necessity of robots in our daily life.

A machine mimicking human behavior at work. It pushes a button over and over again getting angry, bored and distracted.

Have some fun using this handy box with shuffle and counting abilities, supported by 8-bit sound effects.

How long were we released from the gravity of the Earth? This machine measures how many seconds we are zero gravity state.

Goodbye calibration! Digitization of pH test paper! This is a pH meter that reads the color of the pH test paper.

This project is for making a 32-band audio (music) frequency spectrum analyzer / visualizer using Arduino.

A freeform circuit sculpture of a snowflake. Driven by an Arduino Nano using 18 software PWM pins.

ElBanquos Kitchen Timer - having 4 channels to keep track of multiple countdowns during food preparation. Easy to operate with 2 fingers.

‘Do humans dream of machines?’ represents a negative feedback loop between human and machine.

I wanted to convert an old Furby into a famous writer animatronics bot that will interrupt my daily work with wise remarks.

First prototype of a fully functional neonate incubator for educational purposes. Still, a lot to get better, but hey, it works just fine!

This is a wooden Christmas tree I made, using LEDs for the star at the top and the garland on the tree.

Small temperature/humidity/atmospheric pressure monitor using Sigfox to transfer the data. Powered by solar energy to monitor beehives.

An Arduino controlled glowing orb LED lamp with IR remote control.