Publish your Arduino input in real-time so it can be accessible on the internet without taking care of server side.
by Jaume Miralles
FreeRTOS, simple, easy, robust, and optimised for Arduino IDE. Using FreeRTOS Semaphores to share and protect physical resources.
by Phillip Stevens
Use FreeRTOS (simple, easy, robust, & optimised for the Arduino IDE) to reduce the power required for battery or low power applications.
Get an input for your Arduino from the cloud without taking care of server side.
The purpose of this project is to create a radio map of the disaster area using reception devices placed near the affected area.
by Vasile Fotache
A DC motor starter using 600 V CoolMOS™ C7 Gold superjunction MOSFETs for industrial applications.
by Md. Khairul Alam
VFD tubes are a good alternative to Nixie Tubes, especially in retro clock projects. Read about how they can be used with an Arduino.
by Doctor Volt
Why limit yourself to an angel on top of the tree when you can have an over sized Christmas ornament with 192 RGB LEDs blinking!
by Peter Brown
Control aquarium light - sunset, sunrise.
This light switch can be turned on and off using designated RFID tags.
The solar lamp is charged during the day, and they started to pass. Suitable for yards and corridors.
Wondering which is the thrust of your brushless motors? Do you want to check the current absorption? Build your cheap thrust station!
by Vincenzo G.
A little tribute machine that prints On The Road novel in a scroll paper.
by Roni Bandini
I was looking for ways to teach students the basics of PLC and found the OpenPLC project. Opensource, free and uses the IEC 61131 standard.
The HMC5883is a digital compass designed for low-field magnetic sensing. This device has a wide magnetic field range of +/-8 Oe.
by Dcube Tech Ventures
This circuit allows for one thermistor input and will output up to four similar values using digital pots.
by Kevin Strain
With this project, I made an auto turn on or off blind mechanism to my triangle window with the light sensor.
by Bekir Bilge
CPS120 is a high quality and low cost capacitive absolute pressure sensor with fully compensated output.
It's an elevator with automatic doors. The code has two FSM, one for the motor that makes it go up and down and one for the automatic door.
I present to you the advance of the robot following lines that I have worked lately
The built-in electronic components from an old Canon scanner/printer result in real maker delights.
by Ingo Lohs
HYT939 is a digital humidity sensor which works on I2C communication protocol.
A low-cost disinfectant robot that is easy to operate, help control the increase of coronavirus cases and prevent harm to others.
by 3 developers
A virtual assistant to manage entrance and exit of places.
Or connect with your social account:
New here? Create an account