In this project, I've interfaced DHT11 with Arduino and then sending data of DHT11 which is humidity and temperature to phpmyadmin database.
Project tutorial by Embedotronics Technologies
The number of unread emails and the hour on a 16x2 LCD display.
Project tutorial by fmattiussi
Create a simple home automation system using Arduino and an Android phone.
Project showcase by Davide Vertuani
This system monitors places where water could leak and turn the main water valve if any water leakage is detected.
Project tutorial by Philippe Libioulle
This GrowBox Controller handles temperature, humidity, fan and lights, and configuration is made via web server. CSV logs and remote cloud!
Project tutorial by Michele Valentini
Equipped with a keyboard, Ethernet Shield and LCD monitor, is able to execute built-in command and even to send command to a telnet server!
Project tutorial by Alessio Villa
Want to measure solar radiation but cant afford a Pyranometers? Well, make your own device with your Arduino board using this guide.
Project tutorial by Jeffrey
You just bought a RGB LED strip kit and you would like to get rid of that cheap hand-held IR remote and to have REAL control.
This project makes a thermometer using a thermistor.
by Wildan S. Nahar
I decided to make one. I want use Arduino UNO with Ethernets shield, and STC-013 sensor. The data are visible on MQTT Dashboard by Cayenne.
Project tutorial by Giovanni Gentile
This is a low cost robotic arm with 6 axis that you can build with analog servo motors. (I personally used digital servos from hitec).
Project showcase by Danny Van den Heuvel
An attendance system based on Arduino and RFID reader which will save attendance data in real-time to Google spreadsheet.
Do you know the MQTT protocol? Use this with Cayenne. Build your project and use a free cloud platform with Dashboard and many Widgets.
Give your MeArm robot the basic functionality of a real industrial robot.
by Alessio Villa
How to measure the instantaneous power absorbed by the electrical system and send it to a display & sound a buzzer if max power is reached.
Project tutorial by Giuseppe Torino
An open source interpreter and programming language designed to run on Arduino.
Or connect with your social account:
New here? Create an account