These Smart Blinds automatically open and close according to ambient light levels, and also close in response to heat.
Project tutorial by Froz3nArcher
DIY Arduino hot air SMD rework station.
Project tutorial by Alexander and Maker B R
An innovative wearable technology for visually impaired peoples.
Project tutorial by Muhammed Azhar
An autonomous high speed line follower robot based on PID control.
Project tutorial by Nova
Replacement for broken mechanical timer of a washing machine with electronic timer.
Project tutorial by Shahariar
Simple Covid'19 Mask that can be controlled by hand gestures.
Project tutorial by Varun walimbe
Line followers follow lines, right? But what if you put some LEDs on top and use long exposure? Well, you get this!
Project tutorial by circuito.io team
A low-power Arduino car counter that works by logging each time a car drives over a rubber tube across the road.
Project tutorial by Aetos999
Speedometer that uses a GPS for speed sensing and an RGB LED to indicate speed to the user. Also features a blinking white light.
Project tutorial by Jeremy Cook
Low cost smart vitals wearable which can help in early detection of COVID-19 in front line workers
Project tutorial by Vishwas Navada
This is an Arduino library for the SI47XX, BROADCAST AM/FM/SW RADIO RECEIVER IC family from Silicon Labs. This library also has SSB support.
Project tutorial by pu2clr
Step aside, an amazing six-wheel off-road robot coming through! Check out this Arduino-based wireless surveillance DIY RC robot.
Project tutorial by Jithin Sanal
A pair of Arduino glasses that can generate music / tone via a wearer's eyes.
Project tutorial by ashraf_minhaj
A pair of talking smart glass, intended to help the visually impaired.
Project tutorial by Amal Shajan
Sunglasses that serve an even more useful purpose than protecting the eyes of the blind. They can help them detect objects in front of them.
Project tutorial by GardnerTech
A robotic arm that can be wirelessly controlled with a glove that contains IMU and flex sensors.
Project tutorial by Roland Pelayo
Play three variants of the game Tacoyaki (also known as Lights Out). Full instructions and code included.
Project tutorial by John Bradnam
In this project, we'll combine a gyroscope and NeoPixels to build a device that lights LEDs corresponding to the angle of inclination.
Project tutorial by danionescu
Simple robot to build, involve no pcb or proto board, no frames, just using a lot of glues.
Project tutorial by Martedi
Smart adaptor for existing switch which gets triggered based on human presence.
This project is about a shortwave trasmitter from 3 MHz to 30 MHz. It uses the SI5351 oscillator from Silicon Labs controlled by Arduino.
This is an Arduino library for the SI4844, BROADCAST ANALOG TUNING DIGITAL DISPLAY AM/FM/SW RADIO RECEIVER, IC from Silicon Labs.
This is an Arduino Library to control the AKC695X / M695X DSP radio devices.
Program a small Arduino Using A bigger Arduino to Display a Scrolling Text Without a Library.
Project tutorial by Majed Abouhatab, P.E.
Or connect with your social account:
New here? Create an account