While debouncing needs improvement, it's a good start to understand interrupts!
Project showcase by John Boxall and CesareBrizio
Controlling lights and CO2 admission to a aquarium. Sensor data is stored so it can be used for statistics.
Project showcase by mihaimascas
Installation that uses Wi-Fi routers to create sounds.
Project showcase by vtol
6-channel digital sampling oscilloscope with built-in frequency counter, maximum sampling rate 47kHz.
Project showcase by Veldekiaan
Analyze digital inputs on up to six channels using the ATmega328 (e.g. Arduino Uno / Nano / Ethernet / Mini).
Project showcase by drshihan
An interesting and uncomplicated video player using Arduino UNO.
Project showcase by Basicus
An IoT wearable technology to haptically guide users with visual impairments/obstructions while monitoring their environment.
Project showcase by 4 developers
Navibot is a guidance system that helps visitors or patients navigate their way in any new building.
Project showcase by 3 developers
An Arduino NTSC/PAL video display shield with integrated framebuffer and composite video output.
Project showcase by wfriedrich
Manual and programmable robotic arm with fancy control panel.
Project showcase by NerdFatherRJ
Switches as bits, a 4051 daisy chain as bytes, and a small 8-byte ROM for Arduino is made! A tribute to AGC's core rope memory of 1960s!
Project showcase by CesareBrizio
Grab a couple of motors, a servo and build a cannon!
Project showcase by Gord Payne
Control an MAX7219 with an HC-06 Bluetooth module and your mobile phone.
Project showcase by caius
For all of the advanced software and multitude of sensors why is it that this expensive little robot still gets stuck under beds?
Project showcase by Sam Baker
Ultra slow pitch (string) shifter.
It is about a delta robot that can grab and move objects. It is connected to a Raspberry Pi to play Tic Tac Toe using computer vision.
Project showcase by geordag
Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by potentprintables
This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!
I am designing and building an MSE (Mouse) Droid from Star Wars, which will have a hidden payload.
Arduino automatic multiple light control system. Room light on, table lamp off. Room light off, table lamp on via gesture.
Project showcase by ashraf_minhaj
émile is a writing machine using the Baudot code – a binary 5-bit code, predecessor of ASCII and EBCDID.
Project showcase by Julian Hespenheide
Why are even the modern day cars are not equipped with biometric entry system? Here is an attempt on a Toyota C-HR.
Project showcase by Rajeev Velikkal
Geometric Metamorphosis is part of Dynamic Environment studio.
Project showcase by Mostafa Alani, Ph.D
Photographing an object (VC0706 camera), saving a photo from a camera on a micro SD card, sending a photo using 3G/GPRS shield to an email.
Project showcase by ASimon
Or connect with your social account:
New here? Create an account