My first project in Arduino platform. I combined two features in this project, Bluetooth control mode and obstacle avoiding mode.
Project showcase by KureBas Robotics
This project started from FabLab of Boilchon High School. Turning the button changes the sound.
Project showcase by FabLab of Legends
I want to make a small car with the stepping motor. Now, control the stepping motor first!
Project tutorial by Haoming Weng
This project uses RFID to log in or out of a Windows PC using Arduino Pro Micro and MFRC522 module.
by Team MUVARA- The Idiots
A simple and funny project with an Arduino UNO and the famous keypad shield. Arduino selects a random number, you guess the number.
Project tutorial by Giovanni Gentile
This is a low cost robot that will help students in better learning and understanding.
Project showcase by utk6533
This project checks measurements automatically using lasers.
Project in progress by Ingo Lohs
You can make someone else's sunglasses see-through via BLE and check them out from far away, perhaps with your heartbeat.
Project tutorial by Kitty Yeung
An LCD buddy that reacts to you!
Project tutorial by aip06
A bells and whistles rock tumbler for under $10. Too good to be true? Nope, it's not.
Project tutorial by Bob Computeers
This is a simple tutorial to create an EMF detector using an ATtiny85 microcontroller.
First experience with Neopixel.
by Ingo Lohs
This is the next step with an Ultrasonic HC-SR04 Echo and LCD 1602.
Project tutorial by Ingo Lohs
How to use the new Arduino SDU library for SAMD boards to update the sketch on your board, putting it on an SD!
This project creates a relay and a water pump for monitoring moisture.
Project showcase by Ingo Lohs
An introduction to moisture measurement.
Turn your MKR FOX 1200 into a battery-powered weather monitor that you can deploy EVERYWHERE.
Project tutorial by Arduino_Genuino
At my age you have to get up at night and tend to be tired on the way to the bathroom. Use a PIR-Sensor to trigger the light on!
Create your own code red button for use in simulation scenarios. Flashing LEDs and button!
Project tutorial by David Escobar
Luminous ball, with clock and thermometer, controlled by Blynk.
Project tutorial by Tittiamo
Automatic fans act in stages depending on atmospheric conditions with an alert at full capacity.
Project in progress by Bob Computeers
The purpose of the project is to detect the passing of cars and people at the entrance to an orchard and a warning beep inside this house.
Project tutorial by Juan Salvador Aleixandre Talens
Weather Station With Arduino/Genuino, ESP8266, BMP180, DHT22 and Thingspeak.
Project showcase by Tittiamo
This co-working space has a very poor air conditioning system. Now I have a little help from my MicroView Micro Meteo Station.
Or connect with your social account:
New here? Create an account