Clouds meter <> establish the height of clouds through an IR measurement temperature of saturation.
Project in progress by KFMAKR
With a lot of inspiration from Boston Dynamics projects, I'm trying to make something great without million dollars.
Project in progress by aldoz
The will gimbal a rocket motor back and forth to keep you rocket upright.
Project in progress by Cole Purtzer
If you can't fix it in software you'll have to fix it in hardware in this case. Hence the NMEAtor.
Project in progress by Waps 61
Aria is a voice-activated robotic helper for my mom.
Project in progress by Dwayne Scott Kurfirst
We love electronic and plants, so we created a hydroponic system during the "Robotics in Family" activity at the Juan de Lanuza School.
Project in progress by Luis Antonio Martin Nuez
Basically this device allows to control Relay Module via phone Bluetooth
Project in progress by sthiroshan
An open-source Arduino base remote controller (transmitter) with many customization options for robots and drones.
Project in progress by alirezasafdari and syamil_zaini
Building on and up! Using the lessons learned from the first tracker computer, we combine a bit of everything in this code.
Project in progress by Team Trouble
Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor
Project in progress by ashleyblack
The idea is to create a functional Droideka from Star Wars, or at least something as close to it as possible!
Project in progress by nicogou
I took a normal lawn tractor and added some motors, actuators, and electronics to make it remote-controlled.
Project in progress by Michael Rechtin
A 4 line x 32 character Braille display and keyboard for the Blind.
Project in progress by Sean Kelleher
LIDIA is a Light Disinfecting Apparatus. It is used to quickly disinfect commercial spaces by contorting its geometry to concentrate light.
Project in progress by Team The 3D Engineers
Interconnect solar street-lamps by adding monitoring and communication devices into them.
Project in progress by marcosjom
My 'Gorgy' clock! Enhanced with an IR remote, a TFT display, a barometer, and a humidity and temperature sensor.
Project in progress by Erik de Ruiter
ATM is an Arduino based split flap display which aims to give users a satisfying tarot card reading experience.
Project in progress by i_mozy
A complete DIY weather station that submits its data to the "THINGSPEAK" website, where it can be viewed from any browser.
Project in progress by randtekk
Creating a GPS-controlled, camera-equipped RC boat with an Arduino Mega and 433 MHz remote.
Project in progress by maboshi
IoT water control for irrigation of truffles. It monitors and controls amount of water in storage tanks on field.
Project in progress by 4 developers
Indoor golf terrain which is supported by electrical jacks and controlled by Arduino and Pi to move jacks and make terrain of your choice.
Project in progress by High Voltages
This is the FIRST PART of my build of the Rover in the movie The Last Days On Mars.
Project in progress by Claude (science 3d)
I have started to build it for a homemade amplifier, to set the speed of the fans by the temp of the heathsink and so on.
Project in progress by makeeuropeanu
Robot wirth stepper motor via microstepping, digital motion processing, auto tuning, cascaded PID controller and now with Joy Stick Control.
Project in progress by RolfK
Or connect with your social account:
New here? Create an account