This is a nice retro-look weather station and clock that I made with a POS VFD display for which I did not have any data and information.
Project tutorial by Mirko Pavleski
A huge Nanoleaf like device made from soldering 12 PCBs each contains 7 WS2812B LEDs and anESP12F
Project tutorial by Arnov Sharma
This is a thermometer intended for measuring the temperature in the room where we are staying, also known as room comfort thermometer.
How to make diffrent patterns for LED Cube 4x4x4 with shift registers
Project tutorial by viliamk
A very low power consumption rechargeable temperature and humidity monitor that can run off a rechargeable battery for 12 days or more.
Project tutorial by paulsb
Lacking a real antenna, I made this toy, to sit on my desk and point in the direction of the ISS or other satellites that I'm receiving.
Project tutorial by viorelracoviteanu
A hand-crafted 8x8 LED matrix driven on Arduino using the MCP23017 GPIO expander and controlled via Bluetooth from an Android device.
Project tutorial by Salwa El Kaddaoui
This project will show you how to make a RC Controller which communicates using 2.4GHz radio signal.
Project tutorial by MisterBotBreak
The goal is to defeat wave after wave of descending aliens with a horizontally moving laser to earn as many points as possible.
If you have to drill a certain depth for a project, you need a bench drill with depth display. See how simple it works in this project.
Project tutorial by Thomas Angielsky
I build this device to stop myself from touching my face.
Project tutorial by ChenTheDesignMaker
This Tesla Coil has been modified so that the spark "sings" melody generated by a sound source.
Use an ESP32 Cam and a passive infrared (PIR) sensor to create a motion-activated security camera that posts photos to a Discord channel.
Project tutorial by WillMakesTV
While I exercise it plays music to keep me motivated and afterwards dispenses a reward, a Tic Tac!
Project tutorial by Nikolaos Babetas
This is a board to control two Nokia screens to give my robot eyes. It will be connected to the microcontroller via I2C (two Wire).
Project in progress by Tim Jackson
Using an ATtiny1614 microcontroller with LiPo battery, including USB charging circuitry and logic. It is programmable with Arduino IDE!
Project tutorial by marcozonca
This is another one of my series of unusual clocks. The time is displayed on the WS2812 LED strip containing 34 LEDs
Now a few weeks in test and performing so well... ! An Arduino controller to *very effectively* keep the humidity to an acceptable level.
Project tutorial by Erik de Ruiter
Tutorial on how to use the ADC Module of the ATmega328P
by Yeshvanth Muniraj
How to make balancing LED dot using WS2812 LED strip and MPU6050 accelerometer and gyroscope module.
An Arduino robot that can be controlled using speech or voice!
Project tutorial by ashraf_minhaj
This Project we are going how to make a cool POV clock in a simple way.
Project tutorial by Pro Maker_101
Very simple station that shows: Temperature, Humidity, Heat index, Carbon Monoxide, Alcohol, Carbon dioxide, Toluene, Ammonium and Acetone.
Project tutorial by cstram
Five channels circuit to control Red, Green, Blue, Brightness and Strobo of your LED lamps in an handy box!
Or connect with your social account:
New here? Create an account