This Arduino project automatically switches the watersource solenoid depending on the available stored rainwater.

A fun, colourful RGB LED matrix with a twist!

A machine mimicking human behavior at work. It pushes a button over and over again getting angry, bored and distracted.

This research was conducted focusing on the necessity of robots in our daily life.

Have some fun using this handy box with shuffle and counting abilities, supported by 8-bit sound effects.

A stereo VU meter built with an Arduino Nano and two NeoPixel LED rings.

This is a another version of a music LED strip using Arduino Nano and an Electret Mic/Max4466 Amplifier.

Arduino Nano 32x8 LED matrix displaying date, time, temperature and humidity with a motion sensor.

This project is for making a 32-band audio (music) frequency spectrum analyzer / visualizer using Arduino.

A digital clock using minimum components.

A very useful project, made to monitor system resources without opening Task Manager.

Scan and draw ruff sketch of distances ahead just like RADAR using UltraSonic Distance Sensor.

A Lego arachnid controlled by your smartphone.

This device measures fine dust and NO2 concentration in the air while on the move and adds GPS coordinates to each measurement location.

Imagine being outside cell phone range. How do you broadcast where you are for help? Enter an APRS tracker to broadcast location info.

Christmas is near!

Make an interactive table that displays games, an audio spectrum, and animations on a 12x12 built-in LED matrix.

Weather forecast clock made from a Nano, a salvaged alarm, a BME280 sensor, a DS1307 RTC, an old cell phone battery, and Nokia 5110 screen.

Arduino controlled auxiliary saddle bag lights for a motorcycle.

With only an arduino board, two servos, and an hc-sr04, and some python, you can create a room scanner that is capable of showing depth!

The Critter is a simple Arduino walking robot that is fully 3D printed.

This is a very precise scale for any weight up to 1.5 kg!

Hugo just turned one, and to celebrate we bought him a Duktig kitchen from IKEA. I added a working microwave.

Step by step approach is followed so that any hobbyist or design engineer can have a better understanding of the basic concepts.