Learn how to submit your Arduino-based project. It may even get featured on the Arduino social channels!

BBC Micro connects to WiFi, accesses games over the Internet.

Host a Telegram Bot on your Arduino and chat with your brand new IoT device!

Keep up-to-date on the passing of your favourite satellites overhead with this 3D-printed, Arduino-controlled satellite tracker!

An easy-to-build and low-cost water quality monitor.

IoT based solution for detecting human breathing

This project allows you to transmit DHT environmental data from your MKR1000 to your own customizable Google Sheet for data logging.

Frustrated with the prices for high quality grow light systems? Let's design a fully controllable, easy to adjust, open-source LED panel.

Fancy to see your's vehicle data online in real-time? If so, continue reading!

Do you want to conserve energy and turn the Christmas tree lights on/off when not required? In IOT era, that can be done using MKR1000.

Using websockets on one Arduino MKR1000 connected to wifi, I send temp & humidity data to a chart setup on HighCharts.

An automatic temperature scanning gate is presented to verify the body temperature of any intruder.

Use to record somebody's blow strength. Since without calibration it is relative value.

Step aside, an amazing six-wheel off-road robot coming through! Check out this Arduino-based wireless surveillance DIY RC robot.

UV sterilization lamp based contactless Helmet sterilization box is presented in this project.

An automated sanitizing system for shoes is presented throughout this project. Shoe sanitizer is used to disinfect shoes.

Use the Arduino IOT Cloud to set a temperature goal and switch a red and green LED on /off to represent

Connecting your Arduino to the Arduino IOT Cloud and display the temperature on the Cloud.

How to use the new Arduino SDU library for SAMD boards to update the sketch on your board, putting it on an SD!

A Remote Patient Monitoring System that gives health workers remote access to patient's vitals without physical contact with patients.

A pen holder that determines when there are two or less pens and triggers an Amazon pen set replacement.

Automated environment for reptiles to promote good husbandry and enable maximum lifespan for animals in captivity.

Get familiar with the Arduino IoT Cloud and take your first steps into the world of connected objects.

Real-time artwork based on collected data.