Let's learn about the AVR microcontroller and the assembly language. We create an assembly program to blink the LED on an Arduino Uno board.

Using SD Card and 16x2 LCD module.

The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field.

An Arduino Uno autopilot drone with multiple sensors and a wireless camera controlled by two microcontrollers.

An unmanned ground vehicle, compatible with multi micro control. [OSHW] SA000001 | Certified open source hardware | oshwa.org/sa000001.html

Control home appliances with voice, using Bluetooth and Google Assistant.

Java game Flappy bird on Arduino platforms.

The main objective of this project is to develop a smart home automation system with a button key fob transmitter by using RF.

Arduino Airsoft time bomb. Take a look at the video to see it at work.

A simple method to notify a problem is to use email, It’s very usefully and simple to share, so I created a library to do it.

Objectives: Heating, aeration, and irrigation. Behavior: Event when the temperature is low or high and the soil is dry. (Videos on Story)

Upon scanning the right tag and entering right pass, it will open door and send confirmation message otherwise it will send alert message.

This system is to get 100% sun energy. In this system solar panel will move in the direction of sun from sun rise to sun set.

My project is a library for E32 LoRa (Long Range) device very cheap and long range (from 3Km to 8Km), to simplify usage and conf.

With an ordering system and a database, the robot is designed to automatically deliver dishs to their corresponding tables.

Easily display custom animated glyphs on 16x2 LCD using the createChar() function from the LiquidCrystal library.

A simple menu configuration on an LCD display using six buttons.

Lets control the exact time our toast is being cooked with a precision ±10ms. LINE VOLTAGE, BE CAREFUL.

Use the OmniPreSense RADAR and an Arduino to read surrounding speeds and even make part of flux capacitor replica!

A simple, low-cost flex and pressure sensor!

A simple electromagnetic sensor to measure current induced by a moving magnetic field!

Get not only 5 volts but also 9, 12 volts (18 Watts max) out of any QC-compatible charger/power bank for supplying power hungry projects.

Let's disassemble one RC toy car, racking its main parts, replacing the original embedded electronics by an Arduino.

Sketch of transistor tester project from Karl-Heinz Kübbeler, so it's much simpler to study, modify, verify and upload to an Arduino.