Drones are fun to fly, and it’s possible to do limited flying using brainwaves.

CovidTestDrone enables self-administered COVID-19 tests to be delivered within minutes to patient’s homes via drone delivery.

How to make a DIY Rocket Launcher using Arduino - Design the circuit, make a rocket ignitor and control the launcher from your phone.

A modular 3D printed throttle quadrant and trim wheel for use with flight simulators.

i'm making a simple after burner effect for rc plane motorized with electric ducted fan (EDF) with arduino and leds strip

Measure the thrust of a model rocket motor with an Arduino!

I just levitated small objects using ultrasonic waves

If you want to set up your airplane accordingly to the designer's specification, you need to measure the control surface right angles.

Keep up-to-date on the passing of your favourite satellites overhead with this 3D-printed, Arduino-controlled satellite tracker!

As a free flying paragliding pilot, I have finally built my own simple but effective instrument that plays beep-beep during climb and so on.

To add the feature of Direction Control using the initial direction as a reference and applying a proportional controller.

I have used a 1.kk flight controller along with an Arduino Nano and an ultrasonic sensor to add the feature of altitude hold.

This project describes of a low-cost GPS data logger for RC planes. In a previous project I described how to build a GPS data logger.

This is the simplest example of repulsive magnetic levitation.

Ever wanted to use a newer GoPro camera on your 3DR Solo? Here is how you can connect and control the latest GoPro 5/6/7 camera models.

I wanted an additional analog control in FlightGear - nice, cheap and compact.

It's not only a quadcopter... it's an open source machine!

Learn how to lift-off a drone with your mind and a hacked controller using a MindWave sensor, Arduino MKR1000 and Processing.

How to hack a Syma S107G toy helicopter and control it via infrared using Arduino.

Learn how to use a Lidar sensor and an Arduino to build a configurable forward-facing obstacle detection solution for your 3DR Solo.

It's a simple project that can hover on a cushion of air. It runs by the 1sheeld+ app. Using the Slider, GamePad and Terminal Shield.

Navigational Tracking Device to keep an eye on altitude of Hot Air Balloon or Weather Balloon Satellite.

A drone project that uses the Neural Pattern Recognition Module and other aspects of the Curie Module to advantage for creating a cool drone

The project consists of a kit for drones that includes an electronic device that functions as a meteorological station.