Keep up-to-date on the passing of your favourite satellites overhead with this 3D-printed, Arduino-controlled satellite tracker!
Project tutorial by alex_chang
A small rocket test vehicle that launches without the use of fins!
Project in progress by Cole Purtzer
This will keep your rocket upright and on course!
As a free flying paragliding pilot, I have finally built my own simple but effective instrument that plays beep-beep during climb and so on.
Project tutorial by zoncatan
In a previous project I developed a GPS data logger for RC aircraft but I did not have feedback on the receiver. So I modified the prototype
Project in progress by yvesmorele
To add the feature of Direction Control using the initial direction as a reference and applying a proportional controller.
Project tutorial by harsh dokania
I have used a 1.kk flight controller along with an Arduino Nano and an ultrasonic sensor to add the feature of altitude hold.
This will keep your rocket upright and on course.
My variant of converting a four-channel USB flight simulator into an RC transmitter using Arduino.
Project showcase by tsar_
Fully autonomous rocket!
The hybrid rocket Chimera is a project of the Loughborough Space Society. This hackster. io project shows insights into the electronics team.
Project in progress by Chrisy | Variint
This project describes of a low-cost GPS data logger for RC planes. In a previous project I described how to build a GPS data logger.
Project tutorial by yvesmorele
A efficient rocket motor for high and low powered rocketry.
The will gimbal a rocket motor back and forth to keep you rocket upright.
This will keep your rocket going straight without fins!
This rocket engine was designed with the priority to go to space!!!!
This launch pad helps your rocket go high and far!
Showing my progress in building the dashboard and flight control systems,follow up on channel and github repo to keep track:
Project in progress by The Architect
This system can do a number of things for your rocket!
An open-source Arduino base remote controller (transmitter) with many customization options for robots and drones.
Project in progress by alirezasafdari and syamil_zaini
This is the simplest example of repulsive magnetic levitation.
Project tutorial by Mirko Pavleski
Protect your flying machine!
Project in progress by RoboCircuits
Ever wanted to use a newer GoPro camera on your 3DR Solo? Here is how you can connect and control the latest GoPro 5/6/7 camera models.
Project tutorial by Stephan
I tried to make an Arduino helicopter which can be controlled via smartphone with Bluetooth.
Project in progress by Arnov Sharma
Or connect with your social account:
New here? Create an account