For bike security, There is only ignition lock switch. And it can be easily hacked by the thief. Here I come with a DIY solution for that.
Project tutorial by Shubham Shinganapure
Hot water tank's pump must be stopped if its temperature is greater than the burner's. Monitors are placed in shared places.
Project tutorial by MINAS KALARAKIS
Control the trains of your railway from your phone. Switching between trains by simply changing Bluetooth connections.
Project tutorial by Steve Massikker
How avoid a freezer disaster while I am away.
Project tutorial by mbraccagni
How to control a PC sound system connected to a TV using the IR remote control power button, so both TV & sound system are on/off together.
Project tutorial by Lugh
Make an alarm clock that will only stop once the light is on and the button is pressed using an Arduino Nano.
Project tutorial by Razbot
A pattern lock using Arduino.
Project tutorial by Najad
Ever tried to get out of bed quietly at night only to trip over something and wake up the whole house?
Project tutorial by T3ch Flicks
Wireless voice controlled garage door opener and animated turn signals.
Project tutorial by Sahil Parikh
Just connect your Arduino smart home and control the heater, airing, and lights via Bluetooth!
Project tutorial by Gyula Osi
Intelligently irrigate your yard or garden with dynamic water cycles, rain detection, sunrise detection, and when it's warm enough.
Project tutorial by Christian
Color sorter based on Arduino Nano, TCS230/TCS3200 color sensor, step motor with gear, and small 9g servo.
Project tutorial by Mirko Pavleski
Can light wake you up in the morning?
Project tutorial by Jiří Praus
The sequel to Part 1 of the same video title.
Project tutorial by HeathenHacks
A simple thing that lets you monitor your dog's water intake and reminds you to refill it.
This neat little gadget has a fingerprint sensor so you can secure your cool stuff in a personalised portable case.
Project tutorial by NZDoug
With this cool project, you can make sure your lovely plants are always in their best condition.
Project tutorial by ElectroPeak
How to control several roller shutters with inexpensive relay boards (not ruining them) with physical buttons and remotely simultaneously.
Project tutorial by gomecin
You should never leave your 3D printer unattended... but you do. This device will cut power to your printer when it senses thermal runaway.
Project tutorial by ArtSuzhou
How to build and configure a control unit based on Arduino for opening, closing and other actions for a motorized sliding door.
Project tutorial by DVDMDN
Arduino Nano based relay power switch for Raspberry Pi 3 (Kodi) operated by common TV remote controller.
Project tutorial by Vilém Kužel
Using an ASL shield, get up to 24 stairs setup availability, fade out effect, PWM modulation, wireless connectivity and more.
Project tutorial by Aivaredze
Hey all of you! i've been working on automating my room, and i finally got it after a hard coding and many tries, and i'm glad to share w...
Project tutorial by Christopher Mendez Martinez
This project demonstrates the use of different technologies and their integration to build an intelligent system for home automation.
Project tutorial by the lonely programmer
Or connect with your social account:
New here? Create an account