Never miss anyone at your door! A system that notifies your phone and email whenever someone presses the doorbell.

Secure your house by implementing this handy automatic door management system.

Create a simple home automation system using Arduino and an Android phone.

A system that tells you about the parking slots of an area.

Arduino Safe - 6 digit Passcode

Objectives: Heating, aeration, and irrigation. Behavior: Event when the temperature is low or high and the soil is dry. (Videos on Story)

Are you looking to control your tank water level automatically here's the post for you, how can water level be controlled automatically?

Adruino-controlled incubator for chicken eggs or other stuff.

An Arduino Uno-based alarm with motion sensor, three LED outputs and a keypad with password input.

Upgrade old manual kiln to a digital controller with firing schedules (ramp, target, hold) and data logging.

This includes creating Adafruit account then linking to IFTTT website then adding to Google Assistant for voice commands.

Smart Trash can be done with servo motors or stepper motors.

The goal of this project is to build an aquarium’s device that is connected to a GSM so that we can control & monitor it through SMS.

Press 'Power' to switch everything ON/OFF. Press '1' for the fan and '2' for the lights.

When at least one person enters the room, the light and fan turn ON. When everyone exits the room, the light turns OFF.

A solar-powered temperature and humidity monitoring system for compost.

Creating a smart pillbox in collaboration with Samsung

Controlling lights and CO2 admission to a aquarium. Sensor data is stored so it can be used for statistics.

With the help of Raspberry Pi and Arduino I have developed a home automation system to track day-to-day activities at home.

This is a vehicle automation project with one more idea of ​​what you can do using Arduino.

Home automation project with Arduino, Raspberry Pi and ESP8266.

Control of the HVAC of a car (or other vehicle) via Nextion touch and Arduino UNO.

This Arduino pump tutorial shows a simple example of how to use a float switch and RobotGeek pumping station to refill a reservoir.

For all of the advanced software and multitude of sensors why is it that this expensive little robot still gets stuck under beds?