Make a 5-channel SMS based Home Automation system using 1Sheeld.

This is a door lock security system made with Arduino.

Control tool for testing and light show by the DMX-512 protocol, ideal for quick tests on fixed or temporary installations of lighting.

By using IFTTT, the Google Assistant API, and a Particle Photon, you can make a machine that gives out candy upon your request!

Combine RF and an Arduino to control electronics from your Android smartphone phone.

Make your smart home with Arduino system in less than 30 minutes with this project . Simple, no complicated codes. So let's start?

A working Arduino-powered elevator!

Arduino-based smart home hub allows you to control your devices remotely from outside and monitor your home environment from your phone.

This is a project to control our irritation system, in this case a drip system, using a Raspberry Pi 2 and Cayenne.

This GrowBox Controller handles temperature, humidity, fan and lights, and configuration is made via web server. CSV logs and remote cloud!

Microcontroller based Solar PV System's charge controller, inverter, PowerBank & LED lamp with menu-based navigation system on LCD display

The project acts as an automatic door opener for an establishment then counts up or down the customers that went in and went out.

Taking control of your plants growing process

Record and play back a few seconds of input stored in EEPROM.

This control board integrates with Arduino to allow users to control all aspects of a smart home through a website or Alexa voice commands.

I wanted to make a cost-effective, automated cocktail machine! It is WiFi connected, aesthetically pleasing and makes up to 10 drinks.

The IotStat is a homemade thermostat with Wifi capabilities!

Automatic plant growth model.

Simply the machine has four types of candies and each type has it's special code, you should tweet with this special code to get your candy.

Yes, it's overkill, but if walking up motion-activated light-up stairs is wrong, well then I don't want to be right.

Interactive snake enclosure that is temperature and humidity controlled and uses lat-long to mimic natural light cycles, with an online cam.

A 3-password alarm control panel, using a Bluetooth to arm.

Create a locking system that locks your room with your fingerprint and an access code on the cheap.

Building on and up! Using the lessons learned from the first tracker computer, we combine a bit of everything in this code.