For bike security, There is only ignition lock switch. And it can be easily hacked by the thief. Here I come with a DIY solution for that.

Hot water tank's pump must be stopped if its temperature is greater than the burner's. Monitors are placed in shared places.

A Home Automation system using a Raspberry Pi 2 and Windows 10 IoT Core including an App.

How to build and configure a control unit based on Arduino for opening, closing and other actions for a motorized sliding door.

In this project, I will make an indoor gardening system to take care of my sweet plant and its beautiful flowers.

How to control several roller shutters with inexpensive relay boards (not ruining them) with physical buttons and remotely simultaneously.

Microcontroller based Solar PV System's charge controller, inverter, PowerBank & LED lamp with menu-based navigation system on LCD display

This is an easy to build pet feeder with two timers and accurate portions delivered each time.

Just connect your Arduino smart home and control the heater, airing, and lights via Bluetooth!

Lock and unlocks your door from a desk using a remote.

The hydroMazing system manages your growing environment by making localized data-driven decisions so that you don't have to worry.

This project demonstrates the use of different technologies and their integration to build an intelligent system for home automation.

Intelligently irrigate your yard or garden with dynamic water cycles, rain detection, sunrise detection, and when it's warm enough.

Build your own Arduino-powered light switch that can be controlled using Amazon Alexa.

Arduino powered thermostat and fan controller with overheating alarm.

The Sump Level Monitor will determine sump levels, display them locally and send a 0-5vdc signal, relays output or I2c output.

On this Part 2, we will implement an IoT approach were control will be also possible remotely via Internet.

Build a simple automation project using Arduino Uno and IR remote.

There are many charge controllers available, but ordinary cheap ones are not efficient enough to use with maximum power from solar panels.

Can light wake you up in the morning?

Ever tried to get out of bed quietly at night only to trip over something and wake up the whole house?

With this cool project, you can make sure your lovely plants are always in their best condition.

You should never leave your 3D printer unattended... but you do. This device will cut power to your printer when it senses thermal runaway.

Most hygrometer sensors are known for quickly corroding. This project takes advantage of a RTC to trigger the watering for a herbal garden.