Automated Home using Raspberry Pi 2 (Windows 10 IoT Core) and Arduino.

This tutorial will illustrate the working of an RFID reader.

Upgrade your home security camera or webcam with a motorized stand that will detect and follow any motion around the camera!

Upgrade old manual kiln to a digital controller with firing schedules (ramp, target, hold) and data logging.

An Arduino Uno-based alarm with motion sensor, three LED outputs and a keypad with password input.

How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.

An Arduino UNO-based classic kitchen timer with LCD display and buzzer

Upon scanning the right tag and entering right pass, it will open door and send confirmation message otherwise it will send alert message.

This can hep you to access your home when you are out . You can switch on and off the home appliances from anywhere.

Full Fledged Attendance system which will prompt a free message on user mobile when his attendance will be marked using RFID Tag.

When the door is opened, Arduino sends a notification via Gmail. Magnetic Sensor is used to detect the door open. It can be used with IPv6.

Log humidity, automatic irrigate, switch plant growing lamp on and voice control everything with Amazon Alexa and Arduino.

IoT Enabled Hydroponic Farm

Sweeping frequency magnetic hard water conditioner

Grate to have and envoy with friends. Made compact so you take it with you on the go.

Secure your house by implementing this handy automatic door management system.

How to make a connection between an internet service and Arduino boards.

Arduino Safe - 6 digit Passcode

Easy way to control devices via voice commands.

This project will show you how to make an automated watering system and water level indicator.

An advanced home automation project with Arduino Uno and Bluetooth sensor to control it, anytime from anywhere.

Objectives: Heating, aeration, and irrigation. Behavior: Event when the temperature is low or high and the soil is dry. (Videos on Story)

To open the door, the user will have to first scan the right tag and then he will have to enter the correct password.

Replace an unreliable cheap pressure switch with an Arduino-controlled high current relay. Ver 2 now includes an auto drain valve.