The main objective of this project is to develop a smart home automation system with a button key fob transmitter by using RF.
by Dennis Mwanza
Objectives: Heating, aeration, and irrigation. Behavior: Event when the temperature is low or high and the soil is dry. (Videos on Story)
Project showcase by Billy King
Upon scanning the right tag and entering right pass, it will open door and send confirmation message otherwise it will send alert message.
This system is to get 100% sun energy. In this system solar panel will move in the direction of sun from sun rise to sun set.
Project tutorial by Mayur Rabadiya
Lets control the exact time our toast is being cooked with a precision ±10ms. LINE VOLTAGE, BE CAREFUL.
Project showcase by javier muñoz sáez
Turn on/off your fan without getting up, just by using an IR remote.
Project tutorial by Antonio Di Bella and Gabriele Scordamaglia
An Arduino UNO-based classic kitchen timer with LCD display and buzzer
Project tutorial by Team I and myself
Create a simple home automation system using Arduino and an Android phone.
Project showcase by Davide Vertuani
This can hep you to access your home when you are out . You can switch on and off the home appliances from anywhere.
Project tutorial by Brink.IO
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
Project in progress by philippedc
Ever have an automatic sliding gate installed at your house only to open and close it manually? An easy method to get the system running.
Project tutorial by Lasith Ishan Premaratne
Grate to have and envoy with friends. Made compact so you take it with you on the go.
Project tutorial by Seafox_C
Adruino-controlled incubator for chicken eggs or other stuff.
Project showcase by quantenschaum
Replace an unreliable cheap pressure switch with an Arduino-controlled high current relay. Ver 2 now includes an auto drain valve.
Project in progress by tomwyonkman
In this project I am trying to automate the school alarm using Arduino, RTC clock module and a relay.
Project tutorial by AdelAshraf
Fear not ol' forgetful geezers for I have a solution for the ever-existing problem in these pandemic time of forgetting face mask!!
Project showcase by Henry-Che
A sourdough starter management and maintenance system
Project tutorial by hankscorpio091
No more spreading germs through doorbells.
Project showcase by GadhaGod
Rolling Roof Computer Interface is an Arduino powered device that will automate a Roll-Off-Roof-Observatory.
Project in progress by cfar
Smart control of the liquid cooling system in the PC to minimize noise, keeping temperatures in check!
Project tutorial by seventz
To enter passwords and to allow access to a door or to drive an electronic device, now we will use a RFID device.
Project tutorial by Sarath P
Whole house energy monitor that monitors a split phase 120/240 service and publishes to blynk.
Project tutorial by Corymacs
A simple RFID controlled relay module to turn your PC on/off.
Project tutorial by HeathenHacks
Turn a hot air popper popcorn machine into a high tech coffee roaster using a relay, 120V transformer, and thermocouple.
Project tutorial by Ben Eagan
Or connect with your social account:
New here? Create an account