How to control many actuators like relays from one Arduino output pin? Use a strip of NeoPixel LEDs with LDRs as self-made optocouplers!
Project tutorial by Pedro52
How to make a connection between an internet service and Arduino boards.
Project tutorial by ElectroPeak
This thermostat can be used with any kind of water boiler and any kind of pump.
Project tutorial by philippedc
Grate to have and envoy with friends. Made compact so you take it with you on the go.
Project tutorial by Seafox_c
Learn how to make an Arduino-controlled door lock system that uses a keypad!
Project tutorial by DIY Hacking
This can hep you to access your home when you are out . You can switch on and off the home appliances from anywhere.
Project tutorial by Team Brink.IO
How to make Touch and Android Application Controlled switch board | Bluetooth based Home Automation
Project tutorial by Muhammad Ansar
When the door is opened, Arduino sends a notification via Gmail. Magnetic Sensor is used to detect the door open. It can be used with IPv6.
Project tutorial by phpoc_man
Lights from LEDs will light up as soon as the PIR motion sensor detects a motion.
Project tutorial by Haziq Afandi
Do you own a heating boiler that allows OpenTherm communication? Then it is your lucky day. You can easily control or monitor it!
Project tutorial by Jiří Praus
This system is to get 100% sun energy. In this system solar panel will move in the direction of sun from sun rise to sun set.
Project tutorial by Mayur Rabadiya
The smart solution to control multiple zone heating in your house, Controlling the Floor Unit pump will save you over 150 Euro/Year!
Project tutorial by erkr
Open your door with a special knock using Arduino, Android Phone and 1Sheeld
Project tutorial by Ashraf Nabil
Control 5 home appliances from the manual switches, smartphone, IR remote. Also, control relays with room temperature and ambient light.
Project tutorial by Subhajit Das
Easy way to control devices via voice commands.
Project tutorial by Jalal Mansoori
Automated Home using Raspberry Pi 2 (Windows 10 IoT Core) and Arduino.
Project tutorial by Anurag S. Vasanwala
WaterPi tracks critical metrics about the houseplant, visualizing those metrics with charts, and waters the plant remotely.
Project tutorial by Demirhan Aydin
An Arduino-based automated model railroad layout for running two trains alternatively.
Project tutorial by Kushagra Keshari
Control a wall outlet using an Arduino using this DIY solid state relay outlet.
Project tutorial by Ben Jones
Create a locking system that locks your room with your fingerprint and an access code on the cheap.
Project tutorial by Srivishnu Piratla
This tutorial is about making an automated gate for your driveway for (relatively) cheap with ESP8266, Arduino, and Blynk.
Project tutorial by K Gray
Allows precise control of the throttle speed and the ability to run pre-programmed trolling routines.
Project tutorial by Terry Towle
Automatic catapult for throwing pet food (dog, cat, chicken, etc.), balls and more!
Project tutorial by Nathan King
This module automatically counts the number of people entering or living in a room, home, etc...
Project tutorial by Smit Babariya
Or connect with your social account:
New here? Create an account