You can turn on or off the 16x2 LCD via your smartphone and also you can send the text message over Bluetooth.
Project tutorial by Vishalsoniindia
We want to create a cool gadget that can make a safe zone for your devices to be unlocked.
Project tutorial by ElectroPeak
A guide for the Hologram.io Arduino MKR 1400 GSM workshop for IoTDevFest PHX 2019.
Project tutorial by Moheeb Zara and benstr 🚀
Using WiFi to control your Arduino UNO, Nano or Mega as a basis. Includes feedback and simple hardware.
Project tutorial by adamsstephen
Sample Arduino Uno R3 & Seeeduino V4.2 clients for my Windows 10 IoT Core on RPI based LoRa field gateways.
Project tutorial by Bryn Lewis
A sample Arduino MKR WAN 1300 client for my Windows 10 IoT Core on RPi based LoRa field gateways.
It would be fun to see how your Instagram posts perform in action!
A simple IoT experiment, using an Arduino MKR1000 board to monitor a potentiometer and DHT11 sensor via Favoriot IoT platform.
Project tutorial by Lintang Wisesa
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Thinger.io.
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
Project tutorial by Adithya TG
Use an Arduino UNO, a Bluetooth chip and a high power relay to upgrade your lamp to be remotely controllable.
Project tutorial by zhaoshentech
Board for sensing voltage /current air temperature and motion via I2C and being sent to Librato for monitoring.
Project tutorial by Jade Perreault
A CR2032-powered beacon to communicate over 433MHz RF band with blinks encoded message using ATtiny85 and 433MHz RF trans-receiver Modules
Project tutorial by Shahariar
Monocle enables Alexa devices such as Echo Show/Spot & FireTV to view your network IP cameras & control them with a wireless PTZ controller.
Project tutorial by Team Monocle
Bring your ideas to life without considering that how to program a server to create a host for web communication using TheAmplituhedron.
Project tutorial by Kutluhan Aktar
Enables any of your lights/lamps to be powered by Alexa.
Project tutorial by vincent wong
Alexa-controlled LEDs through Raspberry Pi.
Our project will capture local data, send them to the cloud, where everyone can see them through the internet, acting remotely from there.
Project tutorial by MJRoBot
A Raspberry Pi web server, connected to Arduino & LEDs, serves NodeRED, flow is used to interact with Arduino from a UI controls RGB LEDs.
Project tutorial by Sikkandar Sulaiman
IOT-based project to know about water leakage on your server.
Project tutorial by Patel Darshil
This project showcase the use of Arduino 101 to control relays. I am using LED lights instead of the actual relay for the safety reasons.
Project tutorial by Shivansh Singh
We're pretty good at maintaining our code base, not so much at maintaining our office plants. We use Arduino to keep our plants alive.
Project tutorial by Brian Carbonette
Use voice command to turn LED on or off.
Project tutorial by Liren Yeo
Or connect with your social account:
New here? Create an account