Use the Arduino IOT Cloud to set a temperature goal and switch a red and green LED on /off to represent
Project tutorial by greg
Connecting your Arduino to the Arduino IOT Cloud and display the temperature on the Cloud.
Learn how to control your MKR RGB Shield using Arduino IoT Cloud and Amazon Alexa.
Project tutorial by 3 developers
Learn how to use Arduino IoT Cloud and Amazon Alexa to interact with your sensors.
Project tutorial by 4 developers
This guide is aimed to help you on the very first setup of your MKR WAN 1300 and MKR WAN 1310 boards with TTN.
Project tutorial by Arduino_Genuino and FabLab_CastelfrancoVeneto
IoT device to remotely monitor pressure (0-150 psi) using cellular data. Get notifications for pressures above/below high/low set-points.
Project tutorial by wahltharvey
Make a long range remote controller for your robot.
Project tutorial by Jithin Sanal
Use the popular Blynk app to control and change the state of your IoT Cloud Kit through your smartphone.
by Arduino_Genuino and officine-innesto
Do you want to send message on Discord using an Arduino? It is really easy thanks to webhooks.
by Rémi Sarrailh and madnerd
Get familiar with the Arduino IoT Cloud and take your first steps into the world of connected objects.
by 5 developers
Internet of Things for all! Mozilla WoT gateway based on Raspberry Pi and ESP8266 powered. Try to create your own gateway and device!
Project tutorial by Giovanni Gentile
A very basic tutorial on how to interface a microcontroller to an MQTT broker and interact with data on Node-RED.
Project in progress by Officine Innesto
Easy 'Hello World' with an RF 433MHz transmitter/receiver module and Arduino.
Project tutorial by hixel
Bring river monitoring to a new level! Monitor the pH, water level, and pollution by insoluble substances of a river from anywhere.
Project tutorial by Andrei Florian
The post box of the future. Get notified when you receive mail!
A cube with all the necessary sensors, suitable for a wide range of applications like agriculture, monitoring, ,etc.
Project tutorial by Dhairya Parikh
A simple device that turns the lights on when the user approaches home.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
Log data to a text file on Dropbox whenever an RFID card is scanned.
Simply click a button to receive your phone's geolocation.
This tutorial shows how to use the Arduino MKR GSM 1400's DTMF feature to have a direct interaction with your phone.
The Rural Hack Kit is the perfect electronic set to get started hacking farms, gardens, or even plants on your balcony.
by Officine Innesto
What if the squirrels in your garden would post a tweet on twitter when the squirrel feeder is running out of nuts?
Project tutorial by 3magku
Control the status of soil thanks to Arduino mkrfox1200 and some moisture sensor.
Project tutorial by Andrea De Gaetano
Or connect with your social account:
New here? Create an account