IoT device to remotely monitor pressure (0-150 psi) using cellular data. Get notifications for pressures above/below high/low set-points.

Make a long range remote controller for your robot.

A simple device that turns the lights on when the user approaches home.

Host a Telegram Bot on your Arduino and chat with your brand new IoT device!

Get familiar with the Arduino IoT Cloud and take your first steps into the world of connected objects.

Connect your home heater to Internet and chat with it via Telegram!

This project consists of a small robot controlled via WiFi using an Arduino MKR1000, MKR2UNO Shield Adapter and Arduino Motor Shield!

Turn your MKR FOX 1200 into a battery-powered weather monitor that you can deploy EVERYWHERE.

The post box of the future. Get notified when you receive mail!

Simply click a button to receive your phone's geolocation.

A smarter way to get to school.

Bring river monitoring to a new level! Monitor the pH, water level, and pollution by insoluble substances of a river from anywhere.

Sigfox is a French company founded in 2009 that builds wireless networks to connect low-energy objects.

See when your kids move their presents! Detector sets off an audio alarm and sends an alert directly to your phone!

Log data to a text file on Dropbox whenever an RFID card is scanned.

The Rural Hack Kit is the perfect electronic set to get started hacking farms, gardens, or even plants on your balcony.

Control the status of soil thanks to Arduino mkrfox1200 and some moisture sensor.

A very basic tutorial on how to interface a microcontroller to an MQTT broker and interact with data on Node-RED.

If there is sensitive data that you want to keep private when sharing a sketch, add a secret tab and store your private info there!

Here is how to make an Arduino/Genuino 101 Bluetooth Low Energy thermometer with TMP102 and Blynk.

This project shows you how setup an Intel NUC to interact with a TI SensorTag device using BLE (Bluetooth Low Energy).

This tutorial shows how to use the Arduino MKR GSM 1400's DTMF feature to have a direct interaction with your phone.

Display tweets with a certain hashtag on a led matrix in real time!

Follow a guided installation wizard to get your IoT Gateway configured, and ready to be used on Arduino Create.