This tutorial shows how to use the Arduino MKR GSM 1400's DTMF feature to have a direct interaction with your phone.
In this tutorial, you'll learn how to connect your Arduino MKR GSM 1400 board securely to Google Cloud Platform (GCP) IoT Core.
Project tutorial by Arduino_Genuino
Use a fleet of devices to monitor the soil in an agricultural field or greenhouse, and visualize the data remotely.
Project tutorial by Andrei Florian
Get the position of your MKR GSM 1400 on your smartphone through an SMS with a Google Maps link.
Monitor a battery bank and environmental conditions; send notification if water is detected or batteries are unexpectedly low.
Project in progress by damonlane
Using the MKR GSM 1400 to collect and visualise data from a battery operated IoT sensor over a cellular connection.
Project tutorial by Alexis Susset
An indoor air quality monitoring system for detecting toxic gases.
Project tutorial by Team East West University
IoT device to remotely monitor pressure (0-150 psi) using cellular data. Get notifications for pressures above/below high/low set-points.
Project tutorial by wahltharvey
Ceri could provide reliable real-time data to the processor to monitor the drying stage of coffee beans.
Project showcase by Ahmad Radhy
A prototype for Smart Cities to enhance Environment Monitoring using MKR GSM1400 and Hologram.
Project tutorial by Muhammad Afzal
This is a project based on Arduino MKR GSM 1400 that will send a text notification when it senses rain drops.
Project in progress by Jerico Cruz
Sending Machine to Machine Commands with a Twilio SIM and an Arduino MKR GSM 1400.
by Christopher Konopka
Use an Arduino MKR GSM 1400 and a Blynk app to control the two relays of the MKR Relay Proto Shield.
How to set up a MKR GSM 1400 and publish an event or location to Wia.
Project tutorial by Spivey
A guide for the Hologram.io Arduino MKR 1400 GSM workshop for IoTDevFest PHX 2019.
Project tutorial by benstr 🚀 and Moheeb Zara
Drive the relays of the MKR Relay Shield connected to a MKR GSM 1400 with an SMS.
How to play an MP3 file with Twilio Programmable Wireless, Go and the Arduino MKR GSM 1400.
Use some basic hardware and a 3g connection to see if the little man inside your fridge turns your light off when the fridge door closes :)
Project tutorial by smgs
Or connect with your social account:
New here? Create an account