AKA how to build your own laboratory vortexer without spending a lot of money.
Project tutorial by Federico Vivaldi
Today we are going to learn about touch switch based on TTP223.
In this tutorial, I am going to talk about the PCF8574 8-bit GPIO port extender.
This is my 4th tutorial on how to drive a RELAY (not a relay module) with an Arduino.
A study for a linear measuring device with Arduino and photoelectric rotary encoder.
Project tutorial by fmarzocca
It's an elevator with automatic doors. The code has two FSM, one for the motor that makes it go up and down and one for the automatic door.
Dear friends welcome to another tutorial! Today we are going to learn how to use this analog voltmeter with Arduino.
Project tutorial by Nick Koumaris
Control your Commodore C-64, reset C64, select Kernal, BASIC and Charset ROM, SD2IEC device#, info display.
Project tutorial by Oe7Twj
H3LIS331DL is a low-power high performance 3-axis linear accelerometer belonging to the “nano” family with digital I²C serial interface.
by Dcube Tech Ventures
Embedis is a library for creating simple embedded key-value servers using non-volatile storage like NVSRAM, FRAM, FLASH, or EEPROM.
by Team thingSoC
A Bluetooth multimeter capable of resistance, voltage, current and continuity measurement. Made with Arduino Nano.
Arduino Nano-based, password-protected AC Main Console.
Project showcase by Boaz Lawnce
Incubator that can be fabricated in a typical makerspace at a low cost while achieving the same performance as commercial units.
Project in progress by Biomaker Challenge 2017: Team 41
Goodbye calibration! Digitization of pH test paper! This is a pH meter that reads the color of the pH test paper.
Project showcase by hminowa
Shows to visually impaired or ignoring the resistors colour code, lazy techs etc..., either the exact value or value in E12 or E24 series
Project in progress by rafu
The purpose of this project was to the control an automatic gate with Arduino Nano using finite state machine method and interrupts.
Project showcase by AndreNeves and Nuno Miguel Guerreiro Carvalho Martins
Controlling power to the system using alarms based on voltages!
Project tutorial by T3ch Flicks
An SPI config change for using a Nokia LCD.
Project showcase by Tom van Loon
I built the right and left mouse buttons with wall switches.
This circuit allows for one thermistor input and will output up to four similar values using digital pots.
by Kevin Strain
Track display for a Commodore 1541 floppy drive (retro hardware).
Project showcase by Oe7Twj
I wanted to make an electronics learning kit suitable for ages 12 and above. Nothing fancy like Elenco's kits but It can be done at home.
Project tutorial by Ahmed Mo'nis
A simple yet effective demonstrator of a gear pump endorsed with Arduino Nano + MPU6050 accelerometer to measure vibrations.
Project showcase by FRBB-MECHELEC
Give 16-bit digital output or get 16-bit digital input from any Arduino pins.
Project tutorial by ambhatt
Or connect with your social account:
New here? Create an account