Make the smallest Arduino possible with just an ATtiny85 8-pin DIL-IC running in 8MHz from an internal Oscillator.
by Kristian Blåsol
Did you ever get into a situation where you had to wire up two, three or more I2C sensors to your Arduino just to realize the limitation?
This a basic tutorial on Node-RED and Arduino.
by Gokul Periyasamy
In this tutorial, we are going to learn how we can install python on our computer and how to use it with Arduino,It allows us to send data.
by Smart Technology
Library to use I2C PCF8575 IC with Arduino and ESP8266. This IC can control until 16 digital devices like button or LED with only two pins.
by Renzo Mischianti
In this I have shown how to send data from temperature sensor which is connected to Arduino and send data to Rpi database.
by Ruchir Sharma
How to Set up a MASTER-SLAVE connection between two Arduinos using I2C (Inter-Integrated Circuit) protocol.
PlatformIO is an open source ecosystem for IoT development. And now, PlatformIO for Visual Studio Code is coming!
Simple instruction to let you know how to control an AC voltage device using an IR remote control and the Arduino.
by Mohannad Rawashdeh
Writing only Arduino code, it is easy to set up control over experiments and display results on your PC's panel application.
Ever wanted to make a project that activated on a schedule? Using a Real Time Clock (RTC) is a great way to do it!
by Team RobotGeek Projects Team
Effortlessly roll your own smart home applications with drag-and-drop Alexa 'aware' controls in the Virtual Breadboard Microsoft Store App.
by James Caska
A useful and easy way to control AC Lamp using a motion sensor and Arduino board.
You can use the reset button of the Arduino Uno shield like a push button. The data stored at SRAM and will keep after reset.
Serial communication between the Pycom LoPy and the Arduino Uno.
by Rob Braggaar
One of the things PocketCHIP can be used for is programming and controlling or processing date from an Arduino. We show you how.
by Josh From BreakoutBros.com
This project describes the steps to enable UART access on the Wiscore Alexa Board and communicate with an Arduino board directly via serial.
by Naresh krish
If you want use two Arduino, you can use a simple I/O port to communicate. The point of question is the Ground.
by Giovanni Gentile
With a few code tweaks you can use an UNO and the serial plotter tool like an oscilloscope to examine the power used by another project.
eDOT core is a versatile Arduino board with built-in precision RTC.
The Arduino delay() function has a (usually unintended) side effect, this lesson tells you what it is and how to avoid it if needed.
The ATmega8U2 chip on your Arduino board acts as a bridge between the computer's USB port and the main processor's serial port.
Here I want to tell you how to make incremental encoder from stepper motor.
Or connect with your social account:
New here? Create an account