Using your computer to control the PWM value in your Arduino.
Project tutorial by Super Kid
Serial communication between the Pycom LoPy and the Arduino Uno.
by Rob Braggaar
Hello world! Yep yep, I made another simple project. This time for the KY-021 Mini reed switch. It will simply turn on and off a lamp.
Project showcase by Danny van den Brande
This tutorial will describe basic interface elements of LabVIEW environment and how to make basic application for Arduino.
by Sebastian Peryt
Easily include oscilloscope and frequency counter diagnostics into your own project.
Project showcase by Veldekiaan
One port to role them all.
by Tal O
Improved serial debugging, with debug levels and simple software debugger, to see/change global variables, add watch, or call a function.
Project tutorial by JoaoLopesF
If you want use two Arduino, you can use a simple I/O port to communicate. The point of question is the Ground.
by Giovanni Gentile
How to connect A6 GSM GPRS module with Arduino and also work with “AT” commands.
Project tutorial by EasyMades
One of the things PocketCHIP can be used for is programming and controlling or processing date from an Arduino. We show you how.
by Josh From BreakoutBros.com
This projects explains the basic set up of automation using DTMF technology.It can be applicable in any automation field.
Project tutorial by TEAM DIY
This project describes the steps to enable UART access on the Wiscore Alexa Board and communicate with an Arduino board directly via serial.
by Naresh krish
Observe the magnetic field integrity and polarity in the air with the 3144E Hall effect sensor. Also, adjust the RGB LED colours easily.
Project tutorial by Kutluhan Aktar
With a few code tweaks you can use an UNO and the serial plotter tool like an oscilloscope to examine the power used by another project.
eDOT core is a versatile Arduino board with built-in precision RTC.
Here I want to tell you how to make incremental encoder from stepper motor.
You can flash your ESP-01 and esp-201 (Maybe work with other models) with Arduino IDE and upload any other firmware with ESP flash tools.
Project tutorial by Gustavo Reynaga
The Arduino delay() function has a (usually unintended) side effect, this lesson tells you what it is and how to avoid it if needed.
A simple tutorial on programming ATtiny microcontrollers with an Arduino Uno.
by Arnov Sharma
The ATmega8U2 chip on your Arduino board acts as a bridge between the computer's USB port and the main processor's serial port.
A small tutorial project that tells you what direction your joystick is pointing in when you push it.
Project tutorial by xXarduino_11Xx
In this project, we will be making our own Infrared Controller with two joysticks, two face buttons, and two trigger buttons.
Project tutorial by RobotGeek Projects Team
Or connect with your social account:
New here? Create an account