I controlled 3DCG object using TouchDesigner. The object moves according to the value of the sensor connected Arduino.
Project tutorial by HomeMadeGarbage
4 bit up down counter that represent every count as binary number on LEDs and display its decimal representation on LCD shield.
Project tutorial by Maha Raafat
Frequency Counter and voltage meter for Android phone or tablet.
Project tutorial by moty
Circuito is a DIY controlling pad that works as a supplementary project can control any Arduino device.
Project tutorial by AhmedAzouz
Use an Arduino board to control different gain coefficients from an operational amplifier.
Project showcase by lucian_vdo
Did you ever wonder what happens between the time you click on "Upload" and your sketch starts running? Here's how you can find out...
This library controls and drives motion of all types of bipolar stepper motors with 2 phase (4 terminals).
Project tutorial by ambhatt
Compact board to program an ATtiny using an Arduino UNO.
Project tutorial by Viktor S
Mini-thermostat with input for a 2-wire NTC thermistor and output for a resistive heating element. Plus code & schematics.
Project showcase by salhar1
This video is all about interfacing BMP180 module with Arduino. BMP180 will help us to measure environmental temperature and pressure.
Other than a Windows PC, USB cable and Arduino, here's a no cost approach to doing graphically rich, interactive demos for the Arduino.
by Philip Ushijima
Driving my focus stacking rail using an Arduino to achieve micron steps.
Project tutorial by Jennifer Deegan
A technique for drastically reducing the pins required by a matrix keypad is described.
Project tutorial by Giovanni Carrera
Expand your board's storage with an I2C-enabled EEPROM chip.
by Arduino “having11” Guy
Electronic Swiss Army Knife based on Arduino, Qt and Python. Works on Windows and Linux.
by I/O Blocks Toolkit
Use Arduino CLI tools to code, compile and upload programms to your Arduino Board. Follow this tutorial for getting started with arduino-cli
Project tutorial by Jithin Sanal
My second meetup explored I/O while building a sequencer. This is the project writeyp for that event.
Project tutorial by Elijah Scheele
This project will show you how to connect up to three independent RS485 buses to only one Arduino.
Project tutorial by hwhardsoft
A simple sensor to measure conductivity changes in water and other materials!
by Jen Fox and Hacking STEM
This project demonstrates the working with Shift Register.
Connect your IoT device project to mobile phone through notifications with no pain and even no coding! Spend about 10 minutes to set it up!
by Uladzislau Bayouski
Learn how to solder and debounce a switch.
Project tutorial by Jennifer Chen
A small demonstration of the use of a web service and a data capture circuit via sensors.
Shrinking your Arduino projects saves you money and space! Here I show step by step how to program an ATtiny85 chip.
Project tutorial by Ian Cumming
Or connect with your social account:
New here? Create an account