Receiving and sending the digital and analog signal through AD5669 interface with Arduino to detect the A/D pulses.
Project tutorial by Varul Jain
Retro Atari 65XE plus Arduino Leonardo as USB-keyboard for a modern computer. It will leave the opportunity to use this Atari in native mode.
Project tutorial by Camper Assistant Team
RT-Thread, a powerful multitasking tool optimized for Arduino. You are able to issue shell (FinSH) commands to control your hardware now!
I want to make a spot welder for battery packs or other stuff that cannot be soldered.
Project in progress by Westpol
Probably the most useful Arduino project I've ever made! A automatic tester for a product I sell.
Project tutorial by Brian Lough
Use the IO Expander and Relay Expander with the Arduino to control up to 65,280 relays!
Project tutorial by Christian
Here I want to tell you how to make incremental encoder from stepper motor.
A soft switch with integrated energy monitoring enabling spark free switching for electric vehicles and drones.
Project tutorial by Vishwas Navada
I want to make a CD spot welder for battery packs or other stuff that cannot be soldered.
An Arduino Nano used as an IO expander on I2C for ESP8266. For example, add 8 digitals IO and 6 analog inputs.
Project tutorial by Joel Soranzo
In this tutorial, I am going to talk about the PCF8574 8-bit GPIO port extender.
Why are even the modern day cars are not equipped with biometric entry system? Here is an attempt on a Toyota C-HR.
Project showcase by Rajeev Velikkal
Inexpensive to build but a very useful tool for every electronics laboratory.
Project tutorial by Mirko Pavleski
Electric vehicles are new enough to wonder, how long will they last? This is not a simple question, because it depends on a lot of things.
Project tutorial by George Kartsonas
How to go from theory to a practical working prototype.
by Marc De Loor
Measure the juice left in your AA or AAA batteries anytime using an Arduino Uno and a couple of jumpers.
Project tutorial by AJAY-Negasonic
This library controls and drives motion of all types of bipolar stepper motors with 2 phase (4 terminals).
Project tutorial by ambhatt
This library creates an 8-bit IO port for Arduino by combining any 8 Arduino pins. With this library, one can send/get direct 8-bit data.
This is a library that allows any machine or robot to be controlled by G-code.
Project in progress by tinkersprojects
This project uses an ultrasonic distance sensor to create a pocket of wave interference where a small object can be levitated.
Project tutorial by millerman4487
A technique for drastically reducing the pins required by a matrix keypad is described.
Project tutorial by Giovanni Carrera
DIY Arduino hot air SMD rework station.
Project tutorial by Alexander and Maker B R
Did you ever get into a situation where you had to wire up two, three or more I2C sensors to your Arduino just to realize the limitation?
Improved serial debugging, with debug levels and simple software debugger, to see/change global variables, add watch, or call a function.
Project tutorial by JoaoLopesF
Or connect with your social account:
New here? Create an account