Use two relays to create a flip flop, then create a binary counter with 10 relays - a great way to introduce students to digital logic
Project tutorial by Doug Domke
This is a simple square-wave generator that basically uses the TimerOne library allow you to generate a PWM signal at pin 9.
Project tutorial by Mirko Pavleski
3-channel voltmeter with the ability to measure both negative & positive voltages on the same circuit or 3 different circuits simultaneously
Project tutorial by Shahariar
An example sketch that will read a simple toggle switch reliably, irrespective of the circuit design.
Project tutorial by ronbentley1
There are numerous examples of how to connect button switches via an external interrupt. This example offers an alternative approach.
If you need to debug your Arduino WifiNINA project remotely, plot charts of monitoring data, and more, this is the project for you...
Project tutorial by arduinocc
Relay VS Transistor.
Project tutorial by mdraber
Discharge a fully charged Lithium-Ion cell through a resistor while measuring the current flowing through the resistor to calculate capacity
This function performs FFT with very good speed while maintaining accuracy.
Project tutorial by abhilash_patel
One port to read them all!
Project tutorial by Tal O
A very simple but useful device for your lab.
It is a visual representation of qubits entangled or not. Qubits are simulated with an Arduino firmware, by a biased randomness & collapsed.
Project tutorial by Jose Romaní
This device serves for accurate measurement of small resistances in the range of 0.1 ohm up to 50 ohms.
You'll learn how to communicate two Arduinos via RS485.
Project tutorial by Moreira
"how to hook NRF24 Modules with an Arduino Correctly without killing the module"
Project tutorial by Arnov Sharma
Another simple to build useful instrument in you lab.
You have a fan, but you don't know how to control it? Then you're right here.
Project tutorial by Monstermotte
Having a high power digital dimmer which can be controlled with Arduino is a treat to have, I use it to control my heat gun and drill.
Project tutorial by Tanishq Jaiswal
Simple to build and useful instrument for your lab.
Inexpensive, precision, autorange capacitance meter with a large range.
A guide how to control 7 segment display with Shift register as well as daisy chain them to create multi digit displays
Purpose of this project is to write a code to control coin acceptor with Arduino so it can be used in other projects
This code reads PPM signal from RC receiver by making use of interrupt pin.
This code performs FFT with good accuracy.
Or connect with your social account:
New here? Create an account