One port to role them all.
by Tal O
This is a very simple way to control a 3-phase AC installation in a delta configuration.
Project in progress by philippedc
Learn how to submit your Arduino-based project. It may even get featured on the Arduino social channels!
Project simulator control and display encoder motor.
Using a 3D magnetic sensor and an electromagnet, this project enables you to transfer data via magnetic fields.
Project tutorial by Tomi Chen
Project showcase by Konstantin Dorohov
An Arduino Nano used as an IO expander on I2C for ESP8266. For example, add 8 digitals IO and 6 analog inputs.
Project tutorial by Joel Soranzo
Learn how to use the Arduino Desktop IDE at its best and install it on your PC!
Program Arduino boards without using traditional USB cables.
Project tutorial by Shubham Shinganapure
As ESP8266 works on 3.3V and not 5v, it is important to perform this task.
by Patel Darshil
DIY Arduino hot air SMD rework station.
Project tutorial by Alexander and Maker B R
A battery charge checker on the base of Arduino
Project tutorial by Anton Nogin
This library creates an 8-bit IO port for Arduino by combining any 8 Arduino pins. With this library, one can send/get direct 8-bit data.
Project tutorial by ambhatt
A small device that will help you sorting resistors without wasting time with their color code.
Project tutorial by Federico Vivaldi
This project illustrates switching using a transistor.
Writing only Arduino code, it is easy to set up control over experiments and display results on your PC's panel application.
Get not only 5 volts but also 9, 12 volts (18 Watts max) out of any QC-compatible charger/power bank for supplying power hungry projects.
Project tutorial by Shahariar
Library to use I2C PCF8575 IC with Arduino and ESP8266. This IC can control until 16 digital devices like button or LED with only two pins.
I want to make a spot welder for battery packs or other stuff that cannot be soldered.
Project in progress by Westpol
Measure rotation speed (RPM) with Optocoupler and Encoder disk and Arduino - Quick and Easy!
by Boian Mitov
Using a IR proximity sensor and microcontroller to find the local values of 'g' and will plot a real time damping curve.
Project tutorial by CodersCafe
Best in class Arduino Yun controller.
Project showcase by Team TATCO Inc
Today we are going to learn about touch switch based on TTP223.
Shows to visually impaired or ignoring the resistors colour code or lazy techs, either the exact value or value in E12 or E24 series
Project in progress by rafu
Or connect with your social account:
New here? Create an account