Incubator that can be fabricated in a typical makerspace at a low cost while achieving the same performance as commercial units.

There are 20 predefined wire sizes to choose from and/or one can also enter in custom sizes including their bobbin size.

A difficult code with a try to display waveform on a small screen with precisions. Volts-time, frequency, duty cycle and divisions.

Shows to visually impaired or ignoring the resistors colour code, lazy techs etc..., either the exact value or value in E12 or E24 series

A small little console that allows you to quickly set, test, try many different actuators (e.g. servos, stepper, ultrasonic, DHT22, etc... )

Timer for Arduino pins controlled by Serial monitor

Arduino controlled PWM chopper, acceleration and deceleration ramp, motor braking, OLED display and a little more...

Rotary Encoder USB Control with single and double click action.