Timer to set a custom time for developing of UV sensitive PCBs with built in safety feature.
Project showcase by dingo27 Mobile
Make a cheap variable power supply using the buck converter.
Project showcase by Neeraj Rane
Goodbye calibration! Digitization of pH test paper! This is a pH meter that reads the color of the pH test paper.
Project showcase by hminowa
Make a Linux distribution that is focused on the development of Arduino and IoT. It's a Distro for Arduino.
Project showcase by CESARMASSARI
Track display for a Commodore 1541 floppy drive (retro hardware).
Project showcase by Oe7Twj
This is my version of a data logger using a INA219.
Project showcase by Science 3D
SNODE – is an open source library that allows to make it easy to build a multi-master serial bus network for hot-plugging nodes with sensors
Project showcase by Oleksandr Kornuta
We implement CAN Bus communication with MCP2515 module to communicate between two Arduino for sending temperature data from DHT
Project showcase by Maurizfa (13216008) / Arthur Jogy (13216037) / Agha Maretha (13216095)
In this project, you can measure typically up to 48V. It is recommended to use Arduino digital voltmeter as “0-48V DVM”.
Project showcase by KumarB
Step by step approach is followed so that any hobbyist or design engineer can have a better understanding of the basic concepts.
Project showcase by Team Shailza
Arduino Nano-based, password-protected AC Main Console.
Project showcase by Boaz Lawnce
How to use the ArduiBox Open DIN rail enclosure set for Arduino Nano, UNO and Yun Rev 2.
Project showcase by hwhardsoft
A simple self contained Scalar Network Analyzer. It is used for testing and alignment of RF circuits, including amplifiers and filters.
Project showcase by DuWayne Schmidlkofer
A simple yet effective demonstrator of a gear pump endorsed with Arduino Nano + MPU6050 accelerometer to measure vibrations.
Project showcase by Team FRBB-MECHELEC
A homemade semi-automatic antenna tuner for HF controlled by an Arduino Nano.
Project showcase by ok1fig
An SPI config change for using a Nokia LCD.
Project showcase by Tom van Loon
A maker kit designed for Egyptian girls who want to learn electronics.
Project showcase by Team Ethafa
The purpose of this project was to the control an automatic gate with Arduino Nano using finite state machine method and interrupts.
Project showcase by Nuno Miguel Guerreiro Carvalho Martins and AndreNeves
Or connect with your social account:
New here? Create an account