A difficult code with a try to display waveform on a small screen with precisions. Volts-time, frequency, duty cycle and divisions.
Project in progress by sagar saini
Arduino controlled PWM chopper, acceleration and deceleration ramp, motor braking, OLED display and a little more...
Project in progress by daniel23
There are 20 predefined wire sizes to choose from and/or one can also enter in custom sizes including their bobbin size.
Project in progress by Ray Richter
Rotary Encoder USB Control with single and double click action.
Project in progress by freermottram
A small little console that allows you to quickly set, test, try many different actuators (e.g. servos, stepper, ultrasonic, DHT22, etc... )
Project in progress by willmendil
Timer for Arduino pins controlled by Serial monitor
Project in progress by scardeath0101
Shows to visually impaired or ignoring the resistors colour code, lazy techs etc..., either the exact value or value in E12 or E24 series
Project in progress by rafu
Incubator that can be fabricated in a typical makerspace at a low cost while achieving the same performance as commercial units.
Project in progress by Biomaker Challenge 2017: Team 41
Or connect with your social account:
New here? Create an account