Serial Communication between ESP2866-12 (NODE-MCU) and Arduino to increase the number of analog pins as my primary work.
Project showcase by Pawan Kumar
If you can't find a voltmeter at home or anywhere else, then this hack is for you!
Project showcase by Next Tech Lab
A single Arduino Uno/Mega can carry up to 14 RS-232 boards. Each board is distinguished by ID, which is set via a DIP switch.
Project showcase by phpoc_man
Easy way to control variables with one rotary encoder and OLED display.
Project showcase by yilmazyurdakul
An Arduino UNO Flash and RAM update with the ATmega2560 as DIL 28 variant.
Project showcase by T.F. Mc Temucin
Everyone needs a good scale in kitchen, what better than to build a high precision scale with the UNO?
Project showcase by Fedeasche
project takes a simple RFID Reader and adds an LCD display to it.
Project showcase by Techinc1510
Why are even the modern day cars are not equipped with biometric entry system? Here is an attempt on a Toyota C-HR.
Project showcase by Rajeev Velikkal
We implement RS-485 protocol in communication between two Arduinos using MAX485 module.
Project showcase by Maurizfa (13216008) / Arthur Jogy (13216037) / Agha Maretha (13216095)
A simple method to power a servo on or off from the Arduino, using a NPN Darlington Transistor (TIP-120) and an Arduino.
Project showcase by Kevin Gagnon
Tinkercad is the largest community of 3D design enthusiasts of its kind! It is an online simulator on which projects can be made.
Project showcase by SHIVENDRA VATSA MISHRA
Measure the unknown resistor with a simple configuration!
Project showcase by lucian_vdo
Bluetooth communication between Arduino and the PC using a small interface programmed in Processing.
Project showcase by victruino
This project can add two 3-digit binary numbers to turn into a 4-digit binary number. Math homework solved!
Project showcase by 22warehamD
That's a two-module chronometer for your MTB (or any others sports) to measure your time in a determined circuit!
Project showcase by Gabriele Scordamaglia
Mini-thermostat with input for a 2-wire NTC thermistor and output for a resistive heating element. Plus code & schematics.
Project showcase by salhar1
We implement CAN Bus communication with MCP2515 module to communicate between two Arduino for sending temperature data from DHT
6-channel digital sampling oscilloscope with built-in frequency counter, maximum sampling rate 47kHz.
Project showcase by Veldekiaan
How to use the ArduiBox Open DIN rail enclosure set for Arduino Nano, UNO and Yun Rev 2.
Project showcase by hwhardsoft
Use an Arduino board to control different gain coefficients from an operational amplifier.
Make a Linux distribution that is focused on the development of Arduino and IoT. It's a Distro for Arduino.
Project showcase by CESARMASSARI
Easily include oscilloscope and frequency counter diagnostics into your own project.
An Arduino NTSC/PAL video display shield with integrated framebuffer and composite video output.
Project showcase by wfriedrich
Translate analog XY-plotter output to HP-GL command stream.
Project showcase by johan34
Or connect with your social account:
New here? Create an account