How to Set up a MASTER-SLAVE connection between two Arduinos using I2C (Inter-Integrated Circuit) protocol.
What? Program an Arduino from your Raspberry Pi? It's possible, and super easy!
by Zachary Haslam
I built the right and left mouse buttons with wall switches.
Things you should know using ESP8266 WiFi module for its safety and easiness as it's very delicate module to use.
by Patel Darshil
In this I have shown how to send data from temperature sensor which is connected to Arduino and send data to Rpi database.
by Ruchir Sharma
As ESP8266 works on 3.3V and not 5v, it is important to perform this task.
Keypads are used in all types of devices, including cell phones, fax machines, microwaves, ovens, door locks, etc.
This project uses Virtual Shield for Arduino.
by Super Kid
With the help of Firmata, the Arduino or Particle devices control from the PC.
by Ingo Lohs
ESP8266 Arduino Programming Tutorial - Easy to learn, step by step.
Teaches you how to use the temperature sensor in the Arduino Grove Starter Kit.
Other than a Windows PC, USB cable and Arduino, here's a no cost approach to doing graphically rich, interactive demos for the Arduino.
by Philip Ushijima
If you want use two Arduino, you can use a simple I/O port to communicate. The point of question is the Ground.
by Giovanni Gentile
Back when I first started working with micro controllers, the most annoying thing was when a tutorial I'd spent hours following didn't work.
by Dante Roumega
Build a treasure chest or use an existing storage box, attach a push-button quadrature rotary encoder (endless spinning dial) and lets go!
Simple instruction to let you know how to control an AC voltage device using an IR remote control and the Arduino.
by Mohannad Rawashdeh
Did you ever wonder what happens between the time you click on "Upload" and your sketch starts running? Here's how you can find out...
Demo of I2C serial coms between the PSoC Analog Coprocessor Pioneer Kit as master and an Arduino UNO as slave.
by Steven Bell
This tutorial explains how to upgrade the libraries and the Arduino 101 Firmware.
by Gustavo Reynaga
A useful and easy way to control AC Lamp using a motion sensor and Arduino board.
This is a very basic tutorial that shows just one of many combinations you can make with circuito.io.
by circuito.io team
Using the built-in Arduino EEPROM to save and restore values - Quick and Easy.
by Boian Mitov
This guide will demonstrate to beginners how to use Arduino 101 BLE (Bluetooth Low Energy) feature to control an LED from an Android mobile.
by Muhammad Afzal
The software library to calculate moon age, sunrise and sunset time.
Or connect with your social account:
New here? Create an account