Purpose of this project is to write a code to control coin acceptor with Arduino so it can be used in other projects
Project tutorial by mdraber
This code performs FFT with good accuracy.
Project tutorial by abhilash_patel
Program 6 ATtiny85/13A at the same time with this custom programmer board.
Project tutorial by Arnov Sharma
This is my version of a data logger using a INA219.
Project showcase by Claude (science 3d)
Timer for Arduino pins controlled by Serial monitor
Project in progress by scardeath0101
We will use our M.P.U. 6050 to control a Graphic unit or say Model Paper Plane, which is commonly known as Teapot, with our M.P.U. 6050!
Project tutorial by Mission Critical
There are 20 predefined wire sizes to choose from and/or one can also enter in custom sizes including their bobbin size.
Project in progress by Ray Richter
We implement CAN Bus communication with MCP2515 module to communicate between two Arduino for sending temperature data from DHT
Project showcase by Maurizfa (13216008) / Arthur Jogy (13216037) / Agha Maretha (13216095)
This project uses a micro SD card to store a text file and print it out to a 16x2 liquid crystal display.
Project tutorial by millerman4487
A simple to build, but very sensitive electromagnetic field detector.
Project tutorial by Mirko Pavleski
Use the ATmega328P's 8-bit timer and prescaler to implement custom timed events, rather than relying on millis() or delay().
Project tutorial by Arduino “having11” Guy
MOTOR DRIVER L293D FOR DIY ROBOT KITS MADE BY SDTECH ROBOTICS L293D MOTOR DRIVER FOR 5-12V motor
Project tutorial by Arbaz Khan and Shubham Devkar
Build a 6x6 grid with an MPR121, expanding possible inputs from a mere 12 to 36!
Give 16-bit digital output or get 16-bit digital input from any Arduino pins.
Project tutorial by ambhatt
Controlling power to the system using alarms based on voltages!
Project tutorial by T3ch Flicks
AKA how to build your own laboratory vortexer without spending a lot of money.
Project tutorial by Federico Vivaldi
Make your own mini oscilloscope at home. It’s simple and easy to do!
Project tutorial by CiferTech
A small device that will help you sorting resistors without wasting time with their color code.
Analyze the responses of a bandpass Butterworth and Chebyshev1 filter deployed to an Arduino Nano from the Wolfram Language.
Project tutorial by WolframMicrocontrollerKit
A Bluetooth multimeter capable of resistance, voltage, current and continuity measurement. Made with Arduino Nano.
Showcasing our spot welder, which is controlled by an Arduino Nano.
Project tutorial by Michael Marinis and PCBWay
How to use the ArduiBox Open DIN rail enclosure set for Arduino Nano, UNO and Yun Rev 2.
Project showcase by hwhardsoft
This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.
Project tutorial by raul
A bit more accurate than __TIME__.
Project tutorial by glennedi
Or connect with your social account:
New here? Create an account