A small device that will help you sorting resistors without wasting time with their color code.

The soldering iron controller based on arduino that implements PID method to keep the temperature of the iron.

A simple to build, but very sensitive electromagnetic field detector.

This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.

Make your own mini oscilloscope at home. It’s simple and easy to do!

A programmable, portable, rechargeable power supply based on Arduino featuring an OLED display for viewing V.I.P. of projects/prototypes.

Showcasing our spot welder, which is controlled by an Arduino Nano.

Step by step approach is followed so that any hobbyist or design engineer can have a better understanding of the basic concepts.

Use FreeRTOS (simple, easy, robust, & optimised for the Arduino IDE) to reduce the power required for battery or low power applications.

Build a 6x6 grid with an MPR121, expanding possible inputs from a mere 12 to 36!

A bit more accurate than __TIME__.

FreeRTOS, simple, easy, robust, and optimised for Arduino IDE. Using FreeRTOS Semaphores to share and protect physical resources.

Use Arduino, an OLED display and an AD9833 DDS module to create a useful wave generator for your lab.

This code performs FFT with good accuracy.

Inexpensive to build but a very useful tool for every electronics laboratory.

Purpose of this project is to write a code to control coin acceptor with Arduino so it can be used in other projects

Did your somewhat expensive ($50) soldering iron just die? Well then fix it with another one!

A simple self contained Scalar Network Analyzer. It is used for testing and alignment of RF circuits, including amplifiers and filters.

A homemade semi-automatic antenna tuner for HF controlled by an Arduino Nano.

We implement CAN Bus communication with MCP2515 module to communicate between two Arduino for sending temperature data from DHT

There are 20 predefined wire sizes to choose from and/or one can also enter in custom sizes including their bobbin size.

Incubator that can be fabricated in a typical makerspace at a low cost while achieving the same performance as commercial units.

How to use the ArduiBox Open DIN rail enclosure set for Arduino Nano, UNO and Yun Rev 2.

AKA how to build your own laboratory vortexer without spending a lot of money.