DIY Arduino hot air SMD rework station.

Protect lithium polymer battery pack from over discharge.

This tester can be used for NiCd, NiMh, and all flavors of Li-Ion rechargeables.

Use FreeRTOS (simple, easy, robust, & optimised for the Arduino IDE) to reduce the power required for battery or low power applications.

This project is about a shortwave trasmitter from 3 MHz to 30 MHz. It uses the SI5351 oscillator from Silicon Labs controlled by Arduino.

I needed to set a large number of ds18b20 sensors up and I had to record the address and position of each sensor.

A soft switch with integrated energy monitoring enabling spark-free switching for electric vehicles and drones.

This is an Arduino Library to control the AKC695X / M695X DSP radio devices.

This is an Arduino library for the SI4844, BROADCAST ANALOG TUNING DIGITAL DISPLAY AM/FM/SW RADIO RECEIVER, IC from Silicon Labs.

This is an Arduino library for the SI47XX, BROADCAST AM/FM/SW RADIO RECEIVER IC family from Silicon Labs. This library also has SSB support.