Embedis is a library for creating simple embedded key-value servers using non-volatile storage like NVSRAM, FRAM, FLASH, or EEPROM.
by Team thingSoC
The Companion IC is a very cool looking Clock + Ohmmeter + Capacitance Meter + Diode Tester!
Project tutorial by Srijal Poojari
Make your own mini oscilloscope at home. It’s simple and easy to do!
Project tutorial by PMGOHARIAN
AKA how to build your own laboratory vortexer without spending a lot of money.
Project tutorial by Federico Vivaldi
Single tap, double tap, triple tap, four-tap, Hold, Single tap and hold.
Project tutorial by Najad
Using the built-in Arduino EEPROM to save and restore values - Quick and Easy.
by Boian Mitov
A bit more accurate than __TIME__.
Project tutorial by Mr_Glenn
Analyze the responses of a bandpass Butterworth and Chebyshev1 filter deployed to an Arduino Nano from the Wolfram Language.
Project tutorial by WolframMicrocontrollerKit
Improved version of the soldering iron controller for Hakko 907 iron.
To simplify building the controller, LCD screen is implemented.
Project tutorial by Alexander
Easily connect Arduino boards at a great distance over RS485 with Visuino.
It's an elevator with automatic doors. The code has two FSM, one for the motor that makes it go up and down and one for the automatic door.
A Bluetooth multimeter capable of resistance, voltage, current and continuity measurement. Made with Arduino Nano.
Three different way of connecting a push button with an Arduino microcontroller.
Use the IO Expander and Relay Expander with the Arduino to control up to 65,280 relays!
Project tutorial by Christian
An arduiNOOB friendly tutorial for beginners on daisy-chaining.
Project tutorial by HeathenHacks
This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.
Project tutorial by raul
Did you run out of input pins? Don't worry, here is a solution without any shift registers.
Build a treasure chest or use an existing storage box, attach a push-button quadrature rotary encoder (endless spinning dial) and lets go!
How to use the ArduiBox Open DIN rail enclosure set for Arduino Nano, UNO and Yun Rev 2.
Project showcase by hwhardsoft
A quick and compact Arduino Nano setup with four DIP switches to allow for mode selection. Power is provided by CR2032 battery package.
Project tutorial by Jeremy S. Cook
In this project, I am going to make a LAN cable tester with just a few basic electronics components. It cost me just a bit over $3.
A simple self contained Scalar Network Analyzer. It is used for testing and alignment of RF circuits, including amplifiers and filters.
Project showcase by DuWayne Schmidlkofer
A simple yet effective demonstrator of a gear pump endorsed with Arduino Nano + MPU6050 accelerometer to measure vibrations.
Project showcase by Team FRBB-MECHELEC
How to make projects more robust and reliable using drivers ULN2803, UDN2981 and PNP transistors.
Or connect with your social account:
New here? Create an account