Writing only Arduino code, it is easy to set up control over experiments and display results on your PC's panel application.
Make a Linux distribution that is focused on the development of Arduino and IoT. It's a Distro for Arduino.
Project showcase by CESARMASSARI
Measuring Ambient Light with I2C BH1750 Digital Light Sensor and Arduino - Quick and Easy
Project tutorial by Boian Mitov
A maker kit designed for Egyptian girls who want to learn electronics.
Project showcase by Team Ethafa
Control a relay connected to Arduino with an infrared remote - quick and easy.
A quick and compact Arduino Nano setup with four DIP switches to allow for mode selection. Power is provided by CR2032 battery package.
Project tutorial by Jeremy S. Cook
Analyze the responses of a bandpass Butterworth and Chebyshev1 filter deployed to an Arduino Nano from the Wolfram Language.
Project tutorial by WolframMicrocontrollerKit
AKA how to build your own laboratory vortexer without spending a lot of money.
Project tutorial by Federico Vivaldi
This is my 4th tutorial on how to drive a RELAY (not a relay module) with an Arduino.
Dear friends welcome to another tutorial! Today we are going to learn how to use this analog voltmeter with Arduino.
Project tutorial by Nick Koumaris
It's an elevator with automatic doors. The code has two FSM, one for the motor that makes it go up and down and one for the automatic door.
Embedis is a library for creating simple embedded key-value servers using non-volatile storage like NVSRAM, FRAM, FLASH, or EEPROM.
by Team thingSoC
H3LIS331DL is a low-power high performance 3-axis linear accelerometer belonging to the “nano” family with digital I²C serial interface.
by Dcube Tech Ventures
Arduino Nano-based, password-protected AC Main Console.
Project showcase by Boaz Lawnce
A Bluetooth multimeter capable of resistance, voltage, current and continuity measurement. Made with Arduino Nano.
Incubator that can be fabricated in a typical makerspace at a low cost while achieving the same performance as commercial units.
Project in progress by Biomaker Challenge 2017: Team 41
The purpose of this project was to the control an automatic gate with Arduino Nano using finite state machine method and interrupts.
Project showcase by AndreNeves and Nuno Miguel Guerreiro Carvalho Martins
An SPI config change for using a Nokia LCD.
Project showcase by Tom van Loon
This circuit allows for one thermistor input and will output up to four similar values using digital pots.
by Kevin Strain
I wanted to make an electronics learning kit suitable for ages 12 and above. Nothing fancy like Elenco's kits but It can be done at home.
Project tutorial by Ahmed Mo'nis
A simple yet effective demonstrator of a gear pump endorsed with Arduino Nano + MPU6050 accelerometer to measure vibrations.
Project showcase by Team FRBB-MECHELEC
Inexpensive to build but a very useful tool for every electronics laboratory.
Project tutorial by Mirko Pavleski
Make a cheap variable power supply using the buck converter.
Project showcase by Neeraj Rane
Or connect with your social account:
New here? Create an account