The ATmega8U2 chip on your Arduino board acts as a bridge between the computer's USB port and the main processor's serial port.
Thermistor as thermometer.
Project tutorial by Marcazzan_M
Simple instruction to let you know how to control an AC voltage device using an IR remote control and the Arduino.
by Mohannad Rawashdeh
A useful and easy way to control AC Lamp using a motion sensor and Arduino board.
You can flash your ESP-01 and esp-201 (Maybe work with other models) with Arduino IDE and upload any other firmware with ESP flash tools.
Project tutorial by Gustavo Reynaga
My second meetup explored I/O while building a sequencer. This is the project writeyp for that event.
Project tutorial by Elijah Scheele
Observe the magnetic field integrity and polarity in the air with the 3144E Hall effect sensor. Also, adjust the RGB LED colours easily.
Project tutorial by Kutluhan Aktar
eDOT core is a versatile Arduino board with built-in precision RTC.
Serial communication between the Pycom LoPy and the Arduino Uno.
by Rob Braggaar
In this tutorial I will show how easy it is to read and process analog input values.
by Sebastian Peryt
Hello world! Yep yep, I made another simple project. This time for the KY-021 Mini reed switch. It will simply turn on and off a lamp.
Project showcase by Danny van den Brande
I controlled 3DCG object using TouchDesigner. The object moves according to the value of the sensor connected Arduino.
Project tutorial by HomeMadeGarbage
That's a two-module chronometer for your MTB (or any others sports) to measure your time in a determined circuit!
Project showcase by Gabriele Scordamaglia
The Arduino delay() function has a (usually unintended) side effect, this lesson tells you what it is and how to avoid it if needed.
4 bit up down counter that represent every count as binary number on LEDs and display its decimal representation on LCD shield.
Project tutorial by Maha Raafat
How to Set up a MASTER-SLAVE connection between two Arduinos using I2C (Inter-Integrated Circuit) protocol.
How to design circuits that allow you to drive a load that needs a higher value of voltage or current than Arduino can drive.
In this project, we will be making our own Infrared Controller with two joysticks, two face buttons, and two trigger buttons.
Project tutorial by RobotGeek Projects Team
VB6 app to connect Arduino Uno ports to Windows PC
Project tutorial by moty
This tutorial will describe basic interface elements of LabVIEW environment and how to make basic application for Arduino.
Or connect with your social account:
New here? Create an account