Demonstration of the I2C protocol. A simple example of turning the Arduino's internal LED on from a Raspberry Pi using I2C
Project tutorial by aardweeno
Effortlessly roll your own smart home applications with drag-and-drop Alexa 'aware' controls in the Virtual Breadboard Microsoft Store App.
by James Caska
One of the things PocketCHIP can be used for is programming and controlling or processing date from an Arduino. We show you how.
by Josh From BreakoutBros.com
A useful and easy way to control AC Lamp using a motion sensor and Arduino board.
by Mohannad Rawashdeh
Make a Linux distribution that is focused on the development of Arduino and IoT. It's a Distro for Arduino.
Project showcase by CESARMASSARI
With a few code tweaks you can use an UNO and the serial plotter tool like an oscilloscope to examine the power used by another project.
The ATmega8U2 chip on your Arduino board acts as a bridge between the computer's USB port and the main processor's serial port.
This project describes the steps to enable UART access on the Wiscore Alexa Board and communicate with an Arduino board directly via serial.
by Naresh krish
You can flash your ESP-01 and esp-201 (Maybe work with other models) with Arduino IDE and upload any other firmware with ESP flash tools.
Project tutorial by Gustavo Reynaga
In this tutorial I will show how easy it is to read and process analog input values.
by Sebastian Peryt
How to Set up a MASTER-SLAVE connection between two Arduinos using I2C (Inter-Integrated Circuit) protocol.
Hello world! Yep yep, I made another simple project. This time for the KY-021 Mini reed switch. It will simply turn on and off a lamp.
Project showcase by Danny van den Brande
That's a two-module chronometer for your MTB (or any others sports) to measure your time in a determined circuit!
Project showcase by Gabriele Scordamaglia
eDOT core is a versatile Arduino board with built-in precision RTC.
Observe the magnetic field integrity and polarity in the air with the 3144E Hall effect sensor. Also, adjust the RGB LED colours easily.
Project tutorial by Kutluhan Aktar
VB6 app to connect Arduino Uno ports to Windows PC
Project tutorial by moty
Wirelessly analyze the characteristics of a battery charger to see how or if it is working from anywhere you have internet access.
Project tutorial by David Kanceruk
Serial communication between the Pycom LoPy and the Arduino Uno.
by Rob Braggaar
My second meetup explored I/O while building a sequencer. This is the project writeyp for that event.
Project tutorial by Elijah Scheele
How to design circuits that allow you to drive a load that needs a higher value of voltage or current than Arduino can drive.
I controlled 3DCG object using TouchDesigner. The object moves according to the value of the sensor connected Arduino.
Project tutorial by HomeMadeGarbage
The Arduino delay() function has a (usually unintended) side effect, this lesson tells you what it is and how to avoid it if needed.
In this project, we will be making our own Infrared Controller with two joysticks, two face buttons, and two trigger buttons.
Project tutorial by RobotGeek Projects Team
This project will show you how to connect up to three independent RS485 buses to only one Arduino.
Project tutorial by hwhardsoft
Or connect with your social account:
New here? Create an account