Back when I first started working with micro controllers the most annoying this was when a tutorial i spent hours following didnt work

This project describes the steps to enable UART access on the Wiscore Alexa Board and communicate with an Arduino board directly via serial.

In this tutorial, I am going to show you how to build a voltmeter with a big Nokia 5110 LCD display using Arduino.

This is a simple tutorial to create an EMF detector using an ATtiny85 microcontroller.

How to use the new Arduino SDU library for SAMD boards to update the sketch on your board, putting it on an SD!

A programmable, portable, rechargeable power supply based on Arduino featuring an OLED display for viewing V.I.P. of projects/prototypes.

We train the Intel Arduino 101, with a 128 node hardware neural network chip created by General Vision, to recognize OCR MNIST characters.

Per-tip calibration and high-frequency temperature check by Timer1 for a more accurate soldering iron.

This project is one of a series of projects that is aims to create tools that helps in so many ways.

This project will show you how to schedule to drive the outputs on a MKR Relay Proto Shield using a MKR1000!

In this tutorial we'll try to analyze how alarm systems signals might be sniffed and cloned using a cheap Arduino and some RF modules.

As ESP8266 works on 3.3V and not 5v, it is important to perform this task.

Presented here are the Arduino Mini Shields. These shields are very easy and fun to make, and you can make your own custom shield from this.

This is an Arduino camera module, using the surveillance camera's digital image processing chip-OV0706.

Keypads are used in all types of devices, including cell phones, fax machines, microwaves, ovens, door locks, etc.

Everyone uses a 16MHz oscillator for a homemade Arduino, but did you know that ATmega328 can run without it?

Scratch is a great tool to teach beginners how to code, program interactive stories, and do Physical Computing!

I really want to make a Raspberry Pi laptop but just can't find the right size trackpad so in this project we will be salvaging an old one.

This alarm will turn on a buzzer and the bulb when the capacitance sensor senses something. And Show you how to make the sensor yourself!!!

This post will take you through a step by step instruction on how to use the Rakwireless RAK811 lora module with Arduino

This project uses Virtual Shield for Arduino.