A time switching battery powered solar charged circuit, used to power an Arduino Uno and some peripherals.
Project in progress by Igor Fonseca Albuquerque
This is a library that allows any machine or robot to be controlled by G-code.
Project in progress by tinkersprojects
An open microbial bioreactor for growing cultures of about 1L.
Project in progress by Team Open Bioeconomy Lab
Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.
Project in progress by Turai Botond
Ever wonder how much filament you actually used for a project or have an old mechanical ball mouse laying around to be recycled?
Project in progress by ArtSuzhou
Recently, a friend of mine had an issue with his car’s ECU and needed a frequency counting device.
Project in progress by jasir
Ever wanted to be able to upload your code directly from Notepad++?
Project in progress by Tal O
7 awesome cases for 7 different circuito.io-supported components. It's 3D time!
Project in progress by circuito.io team
This is a very simple way to control a 3-phase AC installation in a delta configuration.
Project in progress by philippedc
Based on a referenced project I implemented interleaved sampling for repetitive waves triggered at same point, achieving 3µs resolution.
Project in progress by claudiolenz
Re-circulation infusion mash system library for Arduino.
Project in progress by francisgagnon9
This code enables you to make an accelerometer and gyroscope give the best results.
Project in progress by OZTL
Universal IR receiver and transmitter for home automation and replica of any IR remote control (air conditioners included); uses WAMP.
Project in progress by msillano
DMX512 tester display / receive or transmit the level of 1 of 512 DMX control channels.
Project in progress by KevinMcArthur
Using Arduino Serial Plotter and LDR to watch effect of capacitors to stabilize circuits.
Project in progress by caioreginato
Developing projects like commercial products
Project in progress by Altium Designer
The Arduino world offers a ton of H/W options and excellent S/W. Making a real industrial project out of it... not so easy.
Project in progress by Ed Caceres
This is a BMS charger that would be as universal as possible for testing Li-ion or LifePo4 cells.
Test all electronic components with Component Tester UNO Shield.
Project in progress by Akshay Baweja
A high power and highly programmable smart battery charger, LED driver and programmable DC source all in one.
Project in progress by PowerShield0621
This study is an example how to build a 3-phases 230V/380V from a 12-24V DC with an Arduino Uno
A sensor-pump system which would be able to adjust drug output of aminoglycosides based on real time sensing of drug in plasma.
Project in progress by Biomaker Challenge 2017: Team 14
Giving you the ability to add more buttons than analog inputs allow with some restrictions.
Project in progress by amosp33
Rodent behavioural test equipment is key for biological research yet expensive - our team is developing a low-cost alternative
Project in progress by 3 developers
Or connect with your social account:
New here? Create an account