This project will show you how to use an RGB LED.
Just a basic sound sensor activated LEDs with an optional LCD for sound level data. ***STROBE LIGHT EFFECT AT AROUND 8:45 MINUTE MARK!***
Project tutorial by HeathenHacks
A "Magic Cauldron" that detects spell casting and responds with dynamic lighting effects.
Project showcase by Ian McKay
I tried controlling the display of flexible LED matrix with 3D gesture sensor.
Project tutorial by HomeMadeGarbage
Uses a photo resistor to determine whether a room is bright, average or dark. It shows this using 3 LEDs and/or the serial monitor.
Project tutorial by DCamino
Using the power of motion, swipe in 4 directions to change the color of an LED!
Project tutorial by Arduino “having11” Guy
In this tutorial, I'll show you how to control a LED with Cortana using Windows 10 Application (UWP), Arduino Uno and Bluetooth Interface.
Project tutorial by Mohamed Emam
Jacques Cousteau style scuba mask turned into an infinity mirror with programmable RGB LEDs controlled by an Arduino.
Project tutorial by Curt White
Get yourself noticed on the night rides using a light sensor and some shinny leds.
Project tutorial by Marius Dima
Traffic lights system for a two-street crossing with pedestrian lights, controlled by Arduino.
Project showcase by lmsousa
Arduino based traffic lights using car lights delay to enable safe pedestrian crossing.
by Team NatalMakers
NeoPixel's are awesome you can control hundreds, thousands, millions of lights with 3 wires (pwr, signal, gnd). Let's learn how to use them!
by Austin Detzel
Make a simple but challenging badge with an LED matrix display and an ATtiny13!
Project tutorial by Team FabLabAQ
RGB LED backlight with audio signal visualization for room/desk backlightning...
Project tutorial by PhilKey
This is a quick night light that uses PTH LED bricks to light up when it gets dark!
Project tutorial by Lunchbox Electronics
A very basic intro into some very cool LEDs!
by Dante Roumega
An Arduino powered Stranger Things light wall costume that can be controlled via Bluetooth serial connection to a cell phone.
Project showcase by Michael Barretta
A simple project to add animated (marquee) lighting to your arcade cabinet or other project with an Arduino Nano and NeoPixels.
Project tutorial by ericBcreator
An ATtiny-based tiny USB lamp that can be turned on/off by knocking, clapping, blowing, finger snapping and shouting.
Project tutorial by Amal Mathew
Receive the signal and control an LED.
Project showcase by Nicholas_N
This is a simple IR sensor block detector for model railroads. It controls three lights: red, yellow and green.
Project in progress by lecurtis
Arduino based 3D LED Cube (3x3x3) which can produce any light pattern with 27 LEDs.
Project tutorial by Praditha Alwis
My first go at dead bug style soldering. A style of soldering where no PCB is used and all of the components are soldered together.
Project tutorial by wrightmac
Blinking LEDs with Arduino and some buttons.
Project tutorial by Super Kid
Or connect with your social account:
New here? Create an account