LED cube 4x4x4, 64 LED diode, 16 forms of work.

A fun, colourful RGB LED matrix with a twist!

This project shows the integration of hardware with mobile application. The user can control equipment from his phone over the internet.

Christmas is near!

The TrafficLight is a project that has Arduino-powered LEDs Blinking like a traffic light.

It's a Morse code receiver base on processing the light signals.

A "Magic Cauldron" that detects spell casting and responds with dynamic lighting effects.

Learn to flash Red and Blue LED's to resemble police Lights.

Traffic lights system for a two-street crossing with pedestrian lights, controlled by Arduino.

An Arduino powered Stranger Things light wall costume that can be controlled via Bluetooth serial connection to a cell phone.

In this project, we will print out Morse Code of a sentence typed in Serial Monitor by flashing LED for each word and space between them.

Arduino Gemma and Neopixel LEDs to give some life to my 3D Printed Princess Hilda Staff: Zelda Link Between Worlds.

Receive the signal and control an LED.

A simple Ping Pong game played on a NeoPixel Ring with Arduino.

Arduino Nano bike bag signals, controlled by a wireless (RF) RC attached to front handle.

An Arduino controlled glowing orb LED lamp with IR remote control.

Create your Larson (Cylon or Kit Car) Scanner, controlled by BLE with the Arduino 101, made with Hackster Box

Automating traffic road crossing signal, will turn red only when there is some presence of pedestrians waiting to cross.

Control 8 x 8 (64) LEDs using two 74HC595 shift registers as fast as possible using SPI and PORT access. (Updated 19 Jan, 2019)

Using the power of a winning idea, an MKR1000, and a TLC5940 to add RGB lighting to my workspace.

A simple, original and cheap Christmas tree made with LED-illuminated plastic straws that can be controlled over WiFi.

In this project I made a Morse code transmitter using Arduino and Winform application.

Three LED and a switch equals railroad crossing lights.

This is a wooden Christmas tree I made, using LEDs for the star at the top and the garland on the tree.