Sending Bytes to an 8x8 LED Matrix.
Simulate a traffic light using an Arduino and LEDs! This project is super cool to watch and easy to make!
Project tutorial by Zachary Haslam
Yet another useless Arduino clock, but i love it.
Project tutorial by Alexander
Uses a photo resistor to determine whether a room is bright, average or dark. It shows this using 3 LEDs and/or the serial monitor.
Project tutorial by DCamino
Because LED are fun - but addressable rocks. :)
Project tutorial by Tal O
Build a simple LED throwie, then make it smart with an Arduino.
by Alex Glow
Build a beautiful “infinity mirror” Illusion that you can control by changing this mirrors' orientation. Rotate for changing colors!
Project tutorial by Lucas Ainsworth
RGB LED backlight with audio signal visualization for room/desk backlightning...
Project tutorial by PhilKey
Receive the signal and control an LED.
Project showcase by Nicholas_N
Christmas is near!
Project showcase by Alexander
This project will let you have some fun playing with colors using Arduino analog input / output. Change colors with just a twist.
Project tutorial by Ahmed Hamdy
Using the power of motion, swipe in 4 directions to change the color of an LED!
Project tutorial by Arduino “having11” Guy
Everyone loved Knight Rider. I want to see more KITT scanners in the world.
Project in progress by Peter Gullberg
Arduino based 3D LED Cube (3x3x3) which can produce any light pattern with 27 LEDs.
Project tutorial by Praditha Alwis
This is my project about an Analog Clock on a LED matrix and Arduino.
Project showcase by LAGSILVA
This project shows the integration of hardware with mobile application. The user can control equipment from his phone over the internet.
Project showcase by Kaustubh Agarwal
In this project, I am going to demonstrate how to use a potentiometer to dim LEDs.
by 3 developers
Ten LEDs connected to an Arduino Uno and a potentiometer.
Project tutorial by PrinceMatthew
NeoPixel's are awesome you can control hundreds, thousands, millions of lights with 3 wires (pwr, signal, gnd). Let's learn how to use them!
by Austin Detzel
A fun, interactive project for makers new to Arduino. Control the brightness of an RGB LED with Potentiometers, with on/off switch built in.
Project tutorial by FIELDING
This project will show you how to fade lights, add a button to it.
Project tutorial by Phuong Vo
Learn to flash Red and Blue LED's to resemble police Lights.
Project showcase by Jolynn Awesome
An alarm that triggers a siren sound an police lights when the beam of light is interrupted.
Project in progress by Vrcg03 and mmgamitoc
Just a basic sound sensor activated LEDs with an optional LCD for sound level data. ***STROBE LIGHT EFFECT AT AROUND 8:45 MINUTE MARK!***
Project tutorial by HeathenHacks
Or connect with your social account:
New here? Create an account